Question about 2001 Mitsubishi Eclipse
Put the key in the ignition and set it to "accessory" setting and leave it there for about 45 minutes.
After that remove the key and put it back in and you should be able to enter the code again.
Posted on May 08, 2009
No. The valves are hydraulic. Pour about a coke tin amount of diesl in with the engine oil. Run the enginr to normal teperature. Drain the oil and refill with new oil. It sounds like a lazy or blocked follower. Once you do this it should disappear.
Posted on May 13, 2009
call 1888mitsu2001, choose option #4, then hit * (star). give the
operator the last 8 numbers in your vin and they will provide the radio
code for FREE!
DO NOT PAY FOR THE CODE ONLINE OR GO TO THE DEALER (they will also charge you).
- you will also need to provide the serial and part number of your radio (takes about 5 minutes to take apart an eclipse dash...1 screw in the bottom of the HVAC panel) if you call the 1888mitsu2001 it will provide basic instructions on how to accomplish this.
- if your radio says "off" (meaning you entered the wrong code too many times) you need to put your key in the ignition and turn it to ACC mode for approx. 45min - 1hr and then your radio will say "code" at which point you can enter the code to unlock the radio.
Posted on Jul 02, 2009
Transmission may be low on transmission fluid or the transmission fluid pump failed. If it's electrical, you can still get it in to gear, but would not shift gears. Good luck and keep me posted, check transmission fluid level and have the transmission line pressure tested. Before that check all your fuses.
Posted on Jan 18, 2010
Tips for a great answer:
Jan 17, 2013 | 2001 Mitsubishi Eclipse
Jul 10, 2012 | Cars & Trucks
Feb 13, 2011 | 2001 Mitsubishi Eclipse Spyder
Jul 21, 2010 | 2001 Mitsubishi Eclipse
Jan 23, 2010 | 2001 Mitsubishi Eclipse
Sep 24, 2009 | 2001 Mitsubishi Eclipse Spyder
Jun 22, 2009 | 2001 Mitsubishi Eclipse
151 people viewed this question
Usually answered in minutes!