SOURCE: how do i change the alternator on my 1997 Lincoln Continental?
remove the coolent over flow tank, pull the power steering fluid resevor out of the way remove belt, remove top alternator bracket, remove 2 bolts under alternator, lift and tilt the bottom out through the opening. hope I was helpfull!
SOURCE: Can't Burp the cooling system - Overheats
If you can't remove all the air by filling while running with heater on hot, there is a possibility that you have a leaking cylinder head gasket (pressure from there will fill the cooling system and displace coolant) To test, have a shop do a hydrocarbon test on the radiator. Hope I'm wrong, but quite often on those I'm not.
SOURCE: 1997 lincoln continental check steering assist light
Is the fluid full enough? there should be a dipstick to tell where the level should be. Also is the belt tight enough? Wires loose?
SOURCE: 1997 lincoln Continental serpentine belt change
you need to find which pulley is the belt tensioner. use a socket and a breaker bar to lift the tensioner. once the belt loosen, slide the belt off one of the pulleys close to you. then slowly release the tensioner.
105 views
Usually answered in minutes!
×