Question about 1996 Jeep Grand Cherokee
SOURCE: serpintine belt
This link will take you to a picture of the diagram. If the link doesn't work contact me and I can email you the picture directly.
Posted on Jan 10, 2009
if you know for certain that the sending unit is correct and the guage is accurate, then yiu may have big problems.....while the engine is running open the oil filler hole.. is everything wet with oil? or does it look dry or just a little lubed? you can allways install an aftermarket oil pressure guage(crappy tire) if you get the same results with that then you may have a week oil pump....worst case scenerio... need an engine rebuild as the moter may have wear issues.does the pressure slowly drop as the motor warms up? at idle ? does it jump up when you step on the gas?
Posted on Mar 30, 2009
if you have the 5.2 V8 its located in the rear of the engine near the dist cap area you can see it if you look in that area , if 4.0 6 cyl its located on the side of the engine block near the oil filter area. It has two wires going to it and screws into the block. It's made mainly of plastic and if broken can allow oil under pressure to spew out and give you thoughts of a blown rear main seal due to the amount of oil all over the underside.
Posted on Dec 09, 2009
Tips for a great answer:
Aug 25, 2015 | 1996 Jeep Grand Cherokee
Jul 21, 2012 | 1999 Jeep Grand Cherokee
Mar 02, 2012 | 1996 Jeep Grand Cherokee
Jun 10, 2011 | 1996 Jeep Grand Cherokee
Oct 23, 2010 | 1996 Jeep Grand Cherokee
Oct 20, 2010 | 1996 Jeep Grand Cherokee
Jan 16, 2010 | 1994 Jeep Grand Cherokee
Oct 31, 2009 | 1997 Jeep Grand Cherokee
Apr 17, 2009 | 2002 Jeep Grand Cherokee
Nov 27, 2008 | 1996 Jeep Grand Cherokee
98 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: