Question about Pontiac Montana
For the sliding doors you need to clean the contacts, there are 6 or 8 on both sides, just wipe them clean as they are probably covered in oil/grease/grime.
Posted on Feb 14, 2009
have someone push the washer button while someone else goes back to the rear and listens for a humming noise. if there is no noise then the little pump that shoots the fluid out is not working.
If there is a humming noise then the line is clogged.
hope this helps
Posted on Jul 01, 2009
It is actually buried under the air cleaner.
first remove the air cleaner tube, throttle body, the thermostat is just below the throttle body in the aluminum cast housing. two bolts to remove, one was easy the other was a real $%&^!!. It is behind the exhaust cross over tube. Good luck. TIP - use WD-40 on the air cleaner tubing to get it to go back on the Throttle body. It isn't as easy as changing a thermostat sounds.
if you are satisfied with my solution then rate for me......
Posted on Jul 20, 2009
Tips for a great answer:
Jul 21, 2018 | Pontiac Cars & Trucks
Jan 16, 2016 | 2006 Pontiac Montana SV6
Apr 14, 2013 | 2000 Pontiac Montana
Jan 31, 2013 | 2001 Pontiac Montana
Jan 22, 2013 | 2002 Pontiac Montana
Jul 16, 2011 | 2001 Pontiac Montana
Feb 16, 2010 | 2000 Pontiac Montana
Mar 30, 2009 | 1999 Pontiac Montana
Nov 30, 2008 | 1999 Pontiac Montana
34 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: