Question about 2003 Dodge Neon
SOURCE: Brake lights
Check your emergency flasher switch... if it located on the column it could have been "hit" and is inbetween the on and off location, this will cause the turn signals and break lights to malfunction
Posted on Jul 31, 2008
SOURCE: 2001 dodge neon tail lights inop
looking at your schematics and , you say tail lights don't work , you didn't mention if front parking lights and license plate lights are working , they all come from the same source , a black /yellow wire , a good clue if front work and rear don't , please advise .if fronts work then you have a open circuit somewhere between junction S118 (near breakout for left headlamp) and rear sockets.
Posted on Dec 31, 2008
If the bulbs are good I would suspect the Brake light switch.
Brake Light Switch: Testing and Inspection
The brake lamp switch can be tested with an ohmmeter. The ohmmeter is used to check continuity between the pin terminals.
Switch Circuit Identification
- Terminals 1 and 2: brake lamp circuit
- Terminals 3 and 4: RWAL/ABS module and Powertrain Control Module (PCM) circuit
- Terminals 5 and 6: speed control circuit
Switch Continuity Test
NOTE: Disconnect switch harness before testing switch continuity.
With switch plunger extended, attach test leads to pins 1 and 2. Replace switch if meter indicates no continuity.
With switch plunger retracted, attach test leads to pins 3 and 4. Replace switch if meter indicates no continuity.
With switch plunger retracted, attach test leads to pins 5 and 6. Replace switch if meter indicates no continuity.
Posted on Sep 11, 2009
Tips for a great answer:
Feb 10, 2013 | 2003 Dodge Durango
Nov 19, 2011 | 2002 Dodge Neon
Sep 30, 2011 | 1998 Dodge Neon
Jan 04, 2011 | 1998 Plymouth Neon
Nov 22, 2009 | 2000 Dodge Neon
Sep 23, 2009 | 2003 Chevrolet Silverado 2500HD
Aug 03, 2009 | 1998 Dodge Neon
Jun 10, 2009 | 2005 Dodge Neon
Aug 17, 2008 | 2003 Dodge Neon
Mar 29, 2017 | 2003 Dodge Neon
209 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: