Question about 2006 Kia Sportage

Open Question

Where is the solenoid on a 2006 Kia Sportage lx 4 cylinder engine

Posted by Joseph Del Castillo on

Ad

5 Related Answers

Anonymous

  • 491 Answers

SOURCE: 2001 kia sportage 80,000 miles 2.0

maybe plug wire corroded

Posted on Oct 19, 2008


motor1258

Mike Butler

  • 6674 Answers

SOURCE: 2006 sportage timing belt- how to change

Here you go, just ignore part about removing sprockets. Click on pictures for larger view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801bca65

Posted on Mar 01, 2009

Ad

Anonymous

  • 4 Answers

SOURCE: missfire on #4 cylinder for 1998 kia sportage

had the same problem....broken spark plug. try replacing your plugs.

Posted on Apr 14, 2009

Anonymous

  • 47 Answers

SOURCE: Starter for kia sportage 2000

  1. Before servicing the vehicle, refer to the precautions at the beginning of this section.
  2. Drain the engine oil.
  3. Remove or disconnect the following:

    Negative battery cable Intake manifold bracket upper bolts Clutch release cylinder and move it aside, if equipped Intake manifold bracket lower bolts and remove the bracket Starter from the clutch, manual transmissions only Starter from the torque converter, automatic transmissions only Starter electrical connectors Move the transmission wire harness aside Starter


    0900c152801b0603.jpg enlarge_icon.gifenlarge_tooltip.gif Fig. Exploded view of the starter

To install:
  1. Install or connect the following:

    Starter to the engine well Starter electrical connectors Lower intake manifold bracket and install the upper bolts Starter into position. When aligned properly torque the bolts to 40 ft. lbs. (54 Nm). Torque the intake manifold bracket bolts to 40 ft. lbs. (54 Nm). Properly position the clutch release cylinder, if equipped. Torque the bolts to 40 ft. lbs. (54 Nm). Torque the intake manifold bracket upper bolts to 40 ft. lbs. (54 Nm). Negative battery cable

Posted on Jun 28, 2009

Anonymous

  • 1 Answer

SOURCE: torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2

Posted on Jan 28, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Diagram of coil pack firing order on 2006 kia sportage

Firing order is 1-2-3-4-5-6
Cylinders on the head with the coil pack are 2-4-6 so the other head is 1-3-5
Its difficult to tell by the diagram but the coil sequence may be 3-4-5-2-6-1
diagram courtesy of autozone.com



25848486-y5zvmpub1gzt0i2h042pkgky-2-0.gif
0helpful
1answer

May i know where is bank1 sensor2 for kia sportage located

depends engine there,?
bank one is means that bank closes to #1 cylinder


sensor 2 is down stream, sensor, for cat monitor.

never post about an engine,not stating what it is, as we cant guess
engines,99%

nor country, as many run many engines.





0helpful
1answer

What other make of 4 cylinder engine can replace a 1999 Kia Sportage engine ? a Suzuki or another Kia 4 cylinder from a optima ?

Got a cutting torch and welder ... you can put in anything you want, so long as the bolt holes line up. Good luck getting it through inspection if you are in the USA.
3helpful
2answers

Torque setting cylinder head bolt 4 cylinder KIA sportage

I need the torque settings and pattern for a Kia Sportage 2.2
0helpful
1answer

I have a Kia Sportage 2006 Lx 2.7l sometimes when try to park thr engine turns off , but when I restart the engine ITS running normally. I note that the rpm fluctuate sometimes.

basicaly you need to check your engine performace is it newly chance oil and tune-up???
when making a reverse your engine gets the load but if your rpm is flactuating the engine will stalled so make sure the engine is in good conditon.
0helpful
2answers

Need key for 2006 Kia Sportage LX

Dealer, and most likely will need to be programmed.
4helpful
1answer

2006 sportage timing belt- how to change

Here you go, just ignore part about removing sprockets. Click on pictures for larger view.

http://www.autozone.com/shopping/repairGuide.htm?pageId=0900c152801bca65
0helpful
1answer

Where is the oil filter located on a 2006 Kia Optima Lx?

sgutowski283: the LX had 2 different engines which could have been in you car. However, KIA has engineered their engines to where the oil filter is located at the very front of the engine below the front crank pulley on both the 4 and 6 cylinder engines.
STAY AWAY FROM CHEAP OIL AND CHEAP OIL FILTERS! You engine will last for 200,000 miles easily, if taken care of.
Good luck, Give the folks at FIXYA some feed back if your happy with my assistance.
Thanks.
0helpful
1answer

Missfire on #4 cylinder for 1998 kia sportage

had the same problem....broken spark plug. try replacing your plugs.

Not finding what you are looking for?
2006 Kia Sportage Logo

Related Topics:

117 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6963 Answers

Brad Brown

Level 3 Expert

18829 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

14974 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...