Question about 2004 Jaguar X-Type
SOURCE: Towing a Jaguar
Your car is a AWD.. I don't recomend Dually truck to tow it. With a dually 2 tires will stay on the road. and you have no choice to desengage the AWD. system.
Bucause you will damage the Transfercase. and made the transsmission. work dry.
The best way is a Flat bed.
Is just my suggestion.
Thank you for use fixya..
Posted on Sep 21, 2008
Looks like you have acommunication problem with the computer, it is going in to safe mode. Check all computer connections before you go to jaguar.
I have attached a picture of the error code.
hope this helps
Posted on Jan 17, 2009
FULLY PRESS THE BUTTON THAT SAYS MODE AND THE CLOCK WILL FLASH PUT 24HR AND TYPE IN THE TIME THEN PRESS MODE AND WILL RESET
Posted on May 01, 2010
You might check this site out for Jag codes. Oxygen sensors can be a sticky job, they're screwed into exhaust and can literally weld themselves in place. Plus in most cases you need special wrench/socket to get around the sensor. (they can be a real pain)
Posted on Jan 04, 2011
Tips for a great answer:
Mar 31, 2017 | 2004 Jaguar X-Type
Mar 31, 2017 | Jaguar Cars & Trucks
Sep 24, 2014 | 2004 Jaguar X-Type
this warning light or any other stays on in the dash it is indicating
that the systems control module (or the system sensor in the case of
lights like low oil pressure, door open indicators etc.) has detected
a fault, it then disables the system (this applies to ABS,TCS, TCM,
SRS and BCM faults and others) as long as the light is on. You must
now have the dealer hook up a special electronic diagnostic tool and
"scan" the system for the fault code that is stored for the
Legend of Abbreviations. ABS Antilock brake system.TCS Traction control system, TCM Transmission control module, SRS Supplemental restraint system, BCM Body control module
Oct 17, 2012 | 2004 Jaguar X-Type
Mar 02, 2011 | 2004 Jaguar X-Type
May 13, 2010 | 2004 Jaguar S Type
Mar 21, 2010 | 2004 Jaguar S Type
Oct 31, 2009 | 2004 Jaguar X-Type
Nov 13, 2008 | 2004 Jaguar S Type
129 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: