At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Unfortunately, you should have gotten the diagnostic codes for the transmission before messing with the shift solenoid. Most of those dodge shift issues are caused by input and output speed sensors.
CarGurusNov 3, 2012 - 04 neon will not go into high gear - 04 neon won't go into high gear. changed transmission fluid. (it tried to change after fluid was changed) gas cap ... ... Car: 2003 Dodge Neon SXT, automatic transmission. As of today, I have ...
CarGurusApr 6, 2014 - Your cars computer gathers info on speed in order to shift gears properly.... then you won't have a speedo and the ECM will not tell the TCM to shift gears in the trans. .... Car: 2003 Dodge Neon SXT, automatic transmission.
input and out put speed sensors tell the TCM and the ECM the difference between engine rpms and transmission input roms so that the correct gear ratio can be selected
A speedo sensor reads the out put shaft (drive line ) shaft and refers to road speed for speed and odometer readings and to calculate the fuel consumption rate
it is possible that you have replaced the wrong sensor
Talk with an accredited transmission specialist shop and have the problem diagnosed
No,Your car is in "limp"mode, there are three sensors on the transmission that tell the computer how fast your going so it knows to upshift, have someone check input sensor,output sensor,and speed sensor.
Replace the output speed sensor on the front of the tranny. It has two wires going to it. ANd looks like a round plug with a bolt like base on it. It is also white.
the trans shift solenoid pack is bolted to the side of the trans closer to the radiator. it is rather large and there are three 10mm bolts holding it to the trans. it is under the input speed sensor and just under the spot where the cooler lines go into the trans.
×