At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
The most common reason for the 3rd brake light not to work is mostly due to a blown bulb, some cars have two or three bulbs in the 3rd light, start by replacing the bulb and go from there. good day.
you need to replace crank position sesor.about 50.00 and an hours labor(pain in the *** wait till you see where they put this thing!)very common falure on these....should have come with a replacement in the glove box when they sold them new!
it means that your fuel is running too rich,and needs more oxygen for a cleaner burn. i think that your oxygen sesor may be faulty,but have autozone run the trouble codes for you,and see what exact part is bad.
The best way to wire a third brake light is to run the wire directly from the brake light switch on the side of the steering colum to the light. You will need a test light to find out what wire lights up when you push the brake pedal. Then you can splice into it when you run your wire to the rear light.
×