Question about 2005 Mitsubishi Lancer
Cut the outer hood release cable sheath (under the dash) back to expose the inner wire cable, then using a pair of locking pliers (Vise Grips) pull on the inner release cable while another person pushes down over the latch area of the hood to relieve pressure on the latch and make it easier to open, the hook is released lubricate the hood latch and hood latch striker with white Lithium Grease (AKA "Lubriplate")
Posted on Mar 14, 2017
Tips for a great answer:
Jul 14, 2016 | Cars & Trucks
Mar 11, 2016 | Cars & Trucks
Dec 03, 2015 | 2008 Mitsubishi Lancer GTS CVT Sedan
Jul 23, 2012 | 2004 Mitsubishi Lancer
Sep 20, 2011 | 2003 Mitsubishi Lancer
Dec 28, 2010 | 2005 Mitsubishi Lancer
Locate the interior hood-release lever under the dashboard on the driver's side of the interior of the car.
Lift up and toward you on the hood release lever. The lever is connected to a cable that releases the hood. The hood will pop up about 1/2 inch when you pull the lever.
Move to the front of the car and locate the exterior hood-release lever under the front of the hood. It is located near the middle of the vehicle, just beyond where the front edge of the hood meets the body. Lift up on the inner lever.
Lift up on the edge of the hood while holding the inner lever in place. When the hood is up, find the hood prop and raise it, setting its tip in the hood-prop mount on the hood, to hold the hood up while you work in the engine bay.
Nov 26, 2010 | Mitsubishi Lancer Cars & Trucks
Jan 12, 2010 | 2003 Mitsubishi Lancer
329 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: