I have a 98 venture, when out of gear I rev the engine and at 3000rpm the engine start cutting out, power then no power,in 1/2 second intervals. It loses more power as you try to accelerate.

I take help from online websites that have this service like helping in repair some like reliable-store have instant help.. others are a bit slow which I don't prefer... rest is up to u.. U can also get free manuals

Jaguar wont rev 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > wont rev 3000 rpm

1998 Jaguar XJ8 won't rev over 3000 rpm ... Wont go beyong 3000 Revs s type 2001, wont go beyond 3000 Revs and it' in limp ... Question about 2002 X-Type ... My jaguar xjr8 year 2000 battery went dead started car went for short drive back ...

Jaguar engine cuts 3000 rpm Questions & Answers - Fixya

www.fixya.com > Forum > Tags > engine cuts 3000 rpm

1998 Jaguar XJ8 won't rev over 3000 rpm ... engine cuts out and shudders at 3000 rpm won't accelerateobd code p0332 2002 jaguar x type 3.0 l P0332 - Knock ... Car is boging out in park and will not go over ... driving, don't worry about it.

Rev Won't go up

www.jaguarforum.com/showthread.php?t=14662

Hi Anonymous, I want to help you with your question, but I need more information from you. Can you please add details in the comment box? Such as what kind of vehicle

run a scanner on the system to determine codes to diagnos problem

No driving will only further damage the parts that are bad and could damage other parts making it even more costly. and it sounds like tranmission problem.

replace fuel filter and most likly the pump next

O2 sensor will most definitely NOT cause an engine to die

I have the same proble, do you find a solution?

It is designed to cut out around 3000rpm in park, so you don't over rev it.

I have the same problem on a s320 cdi, gearbox goes into limp mode and wont rev above or kickdown, at the 1st chance i get to stop i put into park or neutral gear turn off the engine and re-start and then everthing is fine, I read that if you put a new battery on it may solve the problem, it's something to do with the voltage dropping below 10.4 volts. Then it sends a message to e.c.u. that puts your gearbox into limp mode. Hope this will work for you. MERKY