Starter bolt size 95 geometro - 1995 Geo Metro

The size of the bolts that go on the starter of a 1995 Jeep Grand Cherokee Laredo will depend on the model of starter you are using. In general, most starters use bolts that are M6, M8, or M10 in size.
To determine the size of the bolts you need, you will need to refer to the manufacturer's specifications for your particular starter. You can usually find this information in the documentation that came with the starter, or by contacting the manufacturer.
It is also important to note that the starter bolts may not be the same size as the original bolts that came with the vehicle. If you are replacing the starter, make sure to use the correct size bolts as specified by the manufacturer of the starter. Using the wrong size bolts could result in damage to the starter or the vehicle.

Here's a link to your starter bolt size.https://www.mitsubishipartswarehouse.com/oem-parts/mitsubishi-starter-mount-bolt-mf140269

Should be a 14 M/M or Possibly 17 M/M.....Be sure to disconnect Ground (-) Battery Cable before servicing the starter.....Arcing Hazard Exist............

More Information for DORMAN 72182

or Starter Mounting Bolt; Thread Size: M10-1.50 Length: 45mm

which bolt>? there are hundreds.
the FSM covers all this.
so does alldata.com
log in and read it.
or look here.
http://geometroforum.com/site/

or
http://geometro.org/index.php

the real deals....

the links are huge fuses, in the engine bay main fuse box.
why not post symptoms
or at least tell what is dead.?
or look here.
http://geometro.org/viewforum.php?f=7&sid=659c53dba9b53cd5c2d8952140137061

you can buy them at autozone,they may even know what size you need. usually starter bolts are the same size and in some cases just the length is different. simply try the one you have in the other hole and if it works then problem solved on the size but the length may still be different.

You should be able to obtain a starter bolt from any auto parts store.

There are 2 bolts that retain the starter to the engine block and they are on the bottom of the starter motor. Always disconnect the battery before any starter work, also disconnect the battery cable, starter solenoid lead and other fusible links at the stater.

disconnect battery remove nut holding wires on , remove the two starter bolts s remove starter install new starter bolt up new starter re hook up wires reconnect battery