2000 Toyota Corolla Logo

Related Topics:

I have a 2000 Toyota Corolla with central locking problem when I try to start the car

Engine won't start unless aim remote and press unlock again, remote won't unlock hatch, when starting or stopping the engine the doors lock and unlock.

  • 1 more comment 
  • Christine Thomas
    Christine Thomas Mar 03, 2017

    I forgot to add that I have the same problem starting the engine the way I explained above even if I haven't locked the car prior to getting in to start it.

  • Joseph Avelar
    Joseph Avelar Mar 05, 2017

    you may have certification ECU issues or battery issues. the vehicle will have stored error codes that a dealer can easily pull so you're not wasting time or $.

  • Christine Thomas
    Christine Thomas Mar 05, 2017

    Thankyou Joseph i will try this first.

×

5 Related Answers

Anonymous

  • 104 Answers
  • Posted on Mar 09, 2009

SOURCE: drivers door power lock wont work.

Either the wring going to that motor or the motor itself is bad.

Ad

Anonymous

  • 2 Answers
  • Posted on Jun 07, 2009

SOURCE: 2003 Toyota Matrix rear hatch will not unlock

change the battery in your fob

Anonymous

  • 155 Answers
  • Posted on Jul 06, 2009

SOURCE: '00 Toyota Sienna-stuck door

the lock actuator is binding/hanging up, replace it and lube the linkages this should cure that problem....hope this helps...let me know...GL

gordy

  • 226 Answers
  • Posted on Aug 16, 2009

SOURCE: 2005 Toyota Corolla Car Alarm Problem

you may have to disconnect the battery for a minute or so ,this will reset the alarm. check your remote it does have a battery in it. otherwise you have to look for a fuse somewhere under the dash close to the fuse box.each one is diff. depending if it original toyota or aftermarket alarm.

Anonymous

  • 173 Answers
  • Posted on Mar 12, 2010

SOURCE: 2006 Toyota Corolla. The driver's door won't work with remote.

the actuator might have been disconnected from the lock, its attached inside the door, with a metal rod that clips into the actuator, check it out, might be a easy fix, good luck and god bless, please rate me!

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Should the central locking work on my boot as it seems to work on the doors but have to use the key on the boot

depends on your remote. Some have separate button for the trunk and some you press the unlock twice quickly.
0helpful
1answer

2005 toyota corolla verso remote won't unlock

This one you may be stuck paying the 50 dollars but what I would do first is contact the manufacturer of the remote control. I would bet they will help you out. The other option is to go to an after market installer of car alarms that is a bit smaller. They will most likely help you in the hopes of you coming back for further business.
1helpful
1answer
1helpful
1answer

1997 toyota corolla drivers door lock not working...

http://www.manualowl.com Hope this helps! Jimmy
1helpful
1answer

Wireless remote locks and unlocks doors but won't start car. 2004 Toyota Camry

i dont think that your 04 camry has a remote start unless it is an aftermarket installed keyless entry
and remote start. my 03 toyota remote has lock,unlock,trunk onfront of remote and panic button on
the back that is red.
0helpful
1answer

Acura RL 2000 Remote needs Program Instructions

TURN ON IGNITION SWITCH WITH ENGINE OFF.POINT THE REMOTE TRANSMITTER AT CENTRAL LOCKING SIGNAL CONTROL MODULE LOCATED BEHIND PASSENGERS SIDE C POST.WITHIN 4 SECONDS PRESS LOCK OR UNLOCK.WITH REMOTE TRANSMITTER.WITHIN 4 SECONDS SWITCH IGNITION OFF.WITHIN 4 SECONDS SWITCH ON IGNITION WITH ENGINE OFF.WITHIN 4 SECONDS PRESS LOCK OR UNLOCK USING REMOTE TRANSMITTER.WITHIN 4 SECONDS SWITCH OFF IGNITION SWITCH.REMOVES KEYS FROM IGNITION SWITCH WAIT 10 SECONDS THEN TRY USING REMOTE TO SEE IF IT WORKS DOOR LOCKS.IF THIS PROCEDURE DONT WORK.TAKE TO DEALERSHIP.
0helpful
1answer

Central locking not being activated by remote

somehow the car when on valet mode, go to a alarm shop , they should be able to re arm your car without to much damage to your pocket, or read your cars manual, it might inform you on how to fix the problem.
0helpful
1answer

Central Locking does not work

You must reset your remote control in order for the lock/unlock to work properly.

To reset remote you would:
1)Insert Key in Ignition Turn to Position 1(Don't Start the Engine) for about 5 seconds
2)Turn Key Off and HOLD the LOCK button on Remote while pressing the UNLOCK 3 TIMES
3)Release both lock and unlock buttons you are holding
4)All doors should automatically unlock

And exit the door and lock with the Remote.
2helpful
4answers
0helpful
1answer

2000 Toyota Corolla wont start Changed 02 sensor disconnected bat

I had the same problem, i had to remove the whole alarm system to get my car to start, when you unattatch the battery cables, the alarm notices the battery drain and sets the alarm off, i have no idea how much the dealership would charge for a new remote, but im sure its pricey, i would recommend just removing the alarm system, temporarily, until you can get a new remote. Good luck and god bless
Not finding what you are looking for?

530 views

Ask a Question

Usually answered in minutes!

Top Toyota Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

ROBERT GARCIA
ROBERT GARCIA

Level 3 Expert

926 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...