Question about 2003 Hyundai Tiburon
hi no engine codes showing as this is normally the ecu,s engine temperature switch if no codes get the ignition coil checked out while it won,t start yates210456
Posted on Oct 09, 2008
I just found out today that it is a problem for alot of 2003 tiburons that the flasher relay for the turn signals will go out causing the turn signal lights to stay on even with the car off. The relays are internal and located on the circuit board of the BCM. In order to fix you will have to remove and disassemble the bcm circuit board from it's housing and resolder a new flasher relay. Haven't figured out where to get that flasher relay though.
Posted on Jan 30, 2009
POSSIBLE SOLUTION!! There's a seperate Tilt button and a seperate Open/Close button. Hold the Tilt buton up and the Open/Close button up at the same time WHILE THE CAR IS ON. And then turn your car off while still holding the buttons. Then turn your car back on and it should work like brand new again. This re-programs the sunroof.
If this workds for you please email at [email protected] to let me know thanks and GOOD LUCK!!!!
Posted on Jul 29, 2009
the bulb is not working because the fuse is probably dead. (check by the drivers leg side for the fuse box). Door locks will not work because the alarm system needs to be repaired, or replaced. I donot know what to do with the cruise control. and your seatbelt sensors need to be replaced.
Posted on Nov 19, 2009
Tips for a great answer:
Mar 24, 2015 | 2002 Hyundai Santa Fe
Sep 09, 2012 | Hyundai Elantra Cars & Trucks
Aug 20, 2010 | 2003 Hyundai Tiburon
Nov 18, 2009 | 2003 Hyundai Tiburon
Nov 01, 2009 | 2003 Hyundai Tiburon
Oct 26, 2009 | 2003 Hyundai Tiburon
Oct 21, 2009 | 2003 Hyundai Tiburon
Jun 06, 2009 | 2003 Hyundai Tiburon
Jan 19, 2009 | 2003 Hyundai Tiburon
146 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: