How to remove ground effects on 2005 Hyundai tiburon gt

Go to YouTube, and enter "2005 Hyundai Tiburon GT valve timing" in the search box. You will find several videos that deal with changing the timing belt and water pump. Toward the end of each video, when they are reassembling the components, they will show the correct way to set the crankshaft pulley and cam pulleys to properly time the engine.

HYUNDAI TIBURON COUPE 2002 2008 WORKSHOP REPAIR MANUAL

for the best solution of your problem visit this site

Removal & Installation

Specific to:
Hyundai Entourage 2007-2008

1. Before servicing the vehicle, refer to the Precautions Section.
2. Disconnect the negative (-) battery terminal.
3. Remove the crash pad lower panel (A).
   
   
   
   Fig. Remove the crash pad lower panel (A)
4. Remove the 2 screws (A) and the trip switch connector.
5. Remove the crash fascia panel (B).
   
   
   
   Fig. Remove the crash fascia panel (B)
6. Remove the screw with the ignition in the ON position (IG ON) and disconnect the 6P connector.
7. Remove the ignition switch (A).
8. Installation is the reverse of removal procedure.
   
   
   
   Fig. Remove the ignition switch (A)

Specific to:
Hyundai Accent 2006-2008
Hyundai Azera 2006-2008
Hyundai Elantra 2006-2008
Hyundai Sonata 2006-2008
Hyundai Tiburon 2006-2008

1. Before servicing the vehicle, refer to the Precautions Section.
2. Remove or disconnect the following:
   
   The negative battery terminalThe crash pad lower panelThe ignition switch after loosening the screw with IG ON and disconnecting the 6P connector
3. Installation is the reverse of the removal procedure.hope this helps it is off autozone website

Under the hood

Just remove the nut and washer on both post. If you have a rod that locks the battery down, loosen it up so you can remove the clamp that holds the battery down.
Remove negative battery cable first, then positive cable.
When putting the cables back on, positive gets put on first, then negative.

If v6 may need to remove intake manifold and applicable parts to gain acess to spark plug coils, remove coils and remove plugs install reverse order
If 4 cyl remaove cover on valve cover remove spark plug coils etc.

I have a solution for your clutch failure.
ALL... Hyundai Tiburons from 2003 and on use a clutch slave cylinder delay valve.
It is designed to smooth your clutch engagement.
Problem?.. It RUINS clutches by slowing down clutch engagement.
It actually MAKES your clutch slip!
All you need to do is REMOVE this silly little 8 dollar part and not only will your clutch feel fantastic, you will have normal clutch wear!
I myself own a 2004 Tibby, and took the valve out since early 2006 and have put 25,000 miles trouble free miles from it.
I thought the clutch felt "Odd".. being a long time driver of manual transmissions, it just wasnt right.
I felt like there might be something slowing down the clutch engagement.
I was right.
This can be considered a Mod, because it improves performance (lack of slipping).
Why Hyundai used this part at the cost of warranty claims is beyond me, but I have given you the solution to your problem.
This part effects both 2.0L,I4 and 2.7 V6 engines.
This will not affect your warranty because they will never know its missing. ;)
I feel hyundai needs to take care of its customers, but I assure you, no matter how you get this problem resolved from the dealer.. PLEASE REMOVE THE DAMN VALVE.. you wont regret it!
:)

You have to remove the air intake manifold. The last three are under that. If you dont feel comfortable taking it apart then take it to a dealer.