If these are the gas tube style supports, there is a metal half moon clip on either end that has to be pryed back to release and removed to pull the tube off the most that it connects to.
SOURCE: 1994 Volvo 940 timing belt
http://caunter.ca/volvo960/ip14814.pdf
check this pdf with illustrations
thanks
good luck
SOURCE: 1994 Volvo 940 install timing belt
TAKE FRONT COVER OFF(AFTER REMOVING FAN, BELT S, PULLEY AND FAN SHROUD).THEN REMOVE CRANK SHAFT PULLEY. WHEN COVER IS REMOVED YOU'LL SEE 3 SPROKETS, SUGGEST TO BRING CRANK TO TOP DEAD CENTER UNTIL YOU SEE ALL 3 MARKS FOR THE TIMING BELT. REMOVE BELT/INSTALL NEW AND REVERSE PROCEDURE.
SOURCE: 1994 Volvo 940 turbo wont start!!!!!! =[
I am a volvo tech and your problem is fuel pressure ralated and i had same problem in 1995 850 turbo and the fuel pump was the problem and a used one is around 35.00
SOURCE: Removing fuel pump from 1993 volvo 940. I know
you have to spin the pump a little and work around pay attention to how it comes out my first one i got excited and couldnt get it back in but i lowered the tank a little and it was easier
SOURCE: firing order for 1994 volvo 940
1995 Volvo 940 2.3 liter Turbo L4 VIN 83
Hope helps (remember to rate and comment this).
48 views
Usually answered in minutes!
×