Question about 2002 Kia Rio

Open Question

2002 kia rio timing belt with gears removed

Line cam dowell pin with what on gear

Posted by David Wertz on

Ad

5 Related Answers

Anonymous

  • 379 Answers

SOURCE: NEED TIMING GEAR ALIGNMENT PICTURE

99 sportage 2.0 timing gear set up

this link will provide the exact information and diagrams you are looking for . thanks

J5

Posted on Jan 19, 2009

Ad

Ray Keckeisen

  • 599 Answers

SOURCE: 2002 Kia Rio Timing Belt

yes, this is VERY IMPORTANT, this is an interference engine, meaning the valves and the piston cannot be in the same place at the same time,or it will bend the valves.then you are looking at a major repair job,think or it as insurance on your engine. please rate my fix as i strive to be the best,questions,get back to me

Posted on May 21, 2009

Ad

Anonymous

  • 10 Answers

SOURCE: gear box oil filler plug - kia rio

you have to take off the speedometer cable/wiring harness from the top of the trans and fill it from there....one 10mm bolt...very awkward spot...it might be snug, so just take a flat head screwdriver from underneath to tap it loose...

Posted on May 14, 2010

Anonymous

  • 2317 Answers

SOURCE: 2003 Kia Rio manual transmission, stick is stiff g...

I would check the operation of the shifter cable. It may need lubricated.

Posted on Jun 03, 2010

Anonymous

  • 8197 Answers

SOURCE: I've got a 2001 kia

On the pictures below will show you the proper marks of the gears.

Align the crankshaft marks before removing the timing belt - 2.0L (VIN 3) Engine


4c597c5.jpg
Proper alignment of the intake and exhaust camshaft pulley timing marks- 2.0L (VIN 3) Engine

8470569.jpg
Or you can go to autozone.com click on repair info then ad your car under manage my vehicles. You might need to sign in it is free though.

Good Luck please accept the answer

Posted on Oct 30, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

RAV4 when I put cranck timing onTdc cam timing is out by one teeth it only allighns once u place crack timing mark about 20 b4 tdc

The marking on the casing is factory rong, check your piston on TDC & adjust your mark for the teeth
1helpful
1answer

I had my head redone on my 2001 kia rio when i got it back the top cam pulleys were off do they go on a certain way

Yes.
You can research the procedure online or get a repair book for replacing the timing belt which you should have already.
You would also need the torque specs for the head bolts.
There is a mark on each cam gear you have to line up when putting the belt on.
0helpful
1answer

What is the dowel pin locationfor a dodge neon 2.0 dohc on cam gears

Dowel pin? I've rebuilt the 2.0 in my Neon several times for various issues and never had to mess with a Dowel Pin. I'm not even seeing a reference to a Dowel pin in either of my books on that vehicle. If your talking about the Key way located on the Cam pulling that holds the timing belt that Cam shaft is keyed and it will only mount one way. That pin will be at the 12 o'clock position when you put the timing belt back on but don't use that by itself to align the motor back properly. You need to have the crank at #1 TDC and you need to make sure the first two valves are closed with the first valve on the #2 cylinder open and the Exhaust valve closed, or second valve on the #2 closed to properly align the motor for the timing belt.
0helpful
1answer
0helpful
2answers

2002 kia rio 1.5 liter DOHV .both cam sprockets were head rebuilt.i need to know direction of dowl on intake & exhaust camshafts before installing sprockets.should dowls be up,down.one up & one...

Aligning the dual-cam pulleys - YouTube

? 3:22
https://www.youtube.com/watch?v=DPcoLEHEt1I
Nov 30, 2010 - Uploaded by JT
me trying to figure out how to realign the dual-cam pulleys that shifted when I removed the timing belt, shifted ...

2002 KIA Rio 1.5 Liter Timing Belt Replacement - YouTube

? 14:47
https://www.youtube.com/watch?v=jLkdnkFW9c0
Aug 10, 2012 - Uploaded by TheBGravit
Replacing the timing belt on my 2002 KIA Rio. ... Hubitools Universal Timing Gear Clamp - Duration: 1:26. Hubi Tools 618,464 views. 1:26. How to Align the Camshaft if My Timing Belt Broke : Timing Belts & Other Auto ... Kia Spectra Timing Belt Replacement - 1.8L DOHC Engine Part 1 - Duration: 11:36.

How to Align the Camshaft if My Timing Belt Broke : Timing ...

? 4:10
https://www.youtube.com/watch?v=yKFAmfeaycs
May 21, 2013 - Uploaded by ehowauto
Subscribe Now: http://www.youtube.com/subscription_center?add_user=ehowauto Watch More: http://www ...


1helpful
1answer

I have a kia sportage and my customer removed the cam gears and he don't remember how they were. so i am trying to figure out which way the cam dowels face to install the gears

ON THE INTAKE SIDE OF HEAD THE DOWEL WILL FACE THE I ... AND ON THE EXHAUST SIDE IT WILL FACE THE THE E FOR EXHAUST. WHEN LINING UP MARKES THE I AND E WILL FACE UP TOWARD THE MARK ON THE VALVE COVER
1helpful
2answers

Im changing the timing belt on my 2000 kia sportage what are the measurments where do i line up the belt and camm

their is timing marks where they suppose to line up stamped into the engine block cam gears and on the head. twin cams u points marks on cam gears straight toward mark on other cam gear
0helpful
1answer

Timing belt gear line up

The crank gear should have a pin in the center of it that lines up with the notch just above it (at 12 o'clock position). The intake cam gear (gear on the left when looking at the engine from the front) has an "I" mark that lines up with the notch just above it (at 12 o'clock position) and the exhaust cam gear (gear on the right when looking at the engine from the front) has an "E" mark that lines up with the notch just above it (at 12 o'clock position.
13helpful
3answers

How to replace timing belt on 1997 kia sportage

you have 2 sprokets to worry about the top two and crank gear, the crank gear has knocht on it and index on block ( towards back of gear visible from top) place on tdc mark ( top dead center), install the timing belt on this gear first then secure it with a piece of hose or anything that fits in between housing and belt to secure belt from moving from gear) then align the right side sproket on "E" for exhaust cam at top marks on cover and sprocket, then install belt over that sprocket, finally align left side sprocket "I" for intake to the top mark and install belt not too tight or it will make noise just make sure it is firm. now to double check from left to right with you standing in front of vehicle you should have left cam sprocket with "I" for intake to the top and right sproket with "E" for exhaust to the top. having bottom gear on tdc (top dead center mark) and all marks lined up with belt installed and proper tension secured, turn engine over twice and make sure marks meet in the same place then put everything back together. ( recommend you replace both idler and tension pulleys and check water pump, replace if needed or you'll be back.- this procedure goes the same to spectra, sephia, sportage, you will not damage the engine on these vehicles if belt goes out except rio. if timing belt goes out on the rio it will need an engine, if lucky just head. recommended replacement on all is every 60k miles) goo luck tightening the power steering drive belt when you put everything back together, just use a long bar to pry and good leverage. and a second hand comes in handy.
Not finding what you are looking for?
2002 Kia Rio Logo

Related Topics:

212 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6963 Answers

Brad Brown

Level 3 Expert

18852 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15000 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...