I have a 2003 Tiburon GT 6spd and for some reason it won't go into gear on occassion. I can put the clutch to the floor and (i've only tried this once) pushed on the shifter with most of my strength and it goes no where. On top of that, sometimes it felt like it didn't fully engage the gear and I could just lightly tap the shifter and it would pop out (mostly happened in 3rd). My mechanic has adimittedly failed to cure the problem and my car has been gone for 2 weeks. Anyone got advice?
There is a "simple" slave cylinder modification for this car which helps with clutch issues. I performed it on my used 2003 Tiburon GT 6 speed and it helped quit a bit actually. Go to http://www.newtiburon.com and type "slave cylinder mod" in the search. You should be able to find a DIY there. I highly recommend you do this mod to your 2003-2005 tiburon if you're having clutch problems. Good luck!
Dear friend-plse check previous explenation
SOURCE: 2003 Tiburon GT 6spd won't go into gear occassionally
dear friend-1st test:switch engine of and run threw the gears,check 3rd gear engagement(travell),if engagements is smooth we can say that your problem is clutch related,start of with bleeding the clucth,check travell on slave when pressing clutch,check for obstruction at gear shift meganism on top of gearbox.
SOURCE: I have a 2003 Tiburon GT 6spd and for some reason
dear friend-i dont believe your problem is gearbox related but more the clucth,a simple test can give you a idea to the problem,switch the engine off then run threw all the gears,check the travel on gear 3 should be the same as 1 and 5 check for obstruction at gear shift on gear,should this test turn out fine then bleed clucth or replace
1,243 views
Usually answered in minutes!
×