Can i put a 4l60e transmission from a 1994 chevy 1500 4x4 into a 1998 suburban 4x4?

SOURCE: trying to put a tranny

If the overall length of the tailshafts are the same, If I remember correctly, you can just swap the tailshaft housings.In some cases though, the output shaft needs to be swapped as well. Check with any transmission shop and they can tell you for sure!

SOURCE: 4l60e transmission leaking fluid

there is aseal around that tranny shop has to be done from inside tell fixya bouy me ok

Mitchell Baughman

• 225 Answers
• Posted on Dec 25, 2009

SOURCE: 1994 Chevy Suburban Gear slippage

I have had that feeling in my 95 Blazer and it turned out to be a $15 fix. It was the U-joint. Crawl under there and wrap your hands around the drive shaft. Rotate it back and forth. If there is a lot of slop, then it is the U-joint.

SOURCE: 4L60E transmission

rebuild the original, a 95 wont and cant work, and it a 2 wheel drive if the shaft is too long... www.TransmissionGarage.com