Question about 1998 Subaru Legacy
Yes as long as the Motors are the same. You might need to have the computer out of doner car. Doors are suppose to fit 96 to 99.
Posted on Feb 01, 2009
Removing and replacing is not the problem, easy job. Changing the springs is the only problem. Make sure you are very careful when removing springs. Better to have a parts store do it for you. If you do decide to change yourself just make sure clamps are tight and take your time to follow directions exactly. Be careful, good luck and have a great day.
Posted on Jul 08, 2009
steering column bearing sounds like a worn out steering column... jack the front wheels off the ground both sides relieve load on steering wheel to see if it lessens the amount of feel and noise, if it does it shoud be the column bearing, replace bearings or complete column,,, also try with the wheels off the ground and safely supported to manualy steer the wheels by hand and see if you feel in roughness or hear any noises,should some minor resistance but be smooth in it movement if everything suspension and steering component wise is in good working condition... please rate my help.. thanks...
Posted on Aug 05, 2009
the easiest way will be to take it 2 a subaru dealer or an auto electriction and get them 2 remove the alarm..but you could dissconnect and un bolt the external alarm siren..
Posted on Sep 01, 2009
Tips for a great answer:
Jan 24, 2013 | Subaru Legacy Cars & Trucks
Feb 13, 2010 | 1998 Subaru Legacy
Jan 18, 2010 | 1994 Subaru Legacy Outdoor
Nov 09, 2009 | 1992 Subaru Legacy
Aug 30, 2009 | Subaru Legacy Cars & Trucks
Aug 07, 2009 | 1998 Subaru Legacy
Nov 30, 2008 | 1998 Subaru Forester
Sep 19, 2008 | 1998 Subaru Legacy
Mar 30, 2017 | 1998 Subaru Legacy
190 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: