How do I imput radio code in Honda CRV its a G type audio system 5 digits, I have the code, I don't know how to get the numbers on the screen, it's a square screen. It's a 2005 UK model.

The numbers you have are not the code, they are the numbers required to retrieve the code from either Honda or an audio specialist.

posted now 14times. lost your operators guide, its all there, every word, to read, buy one, and win.

here it is , again.
De'ja' vu , all over again. (LOL) RTM
RTM read the operators manual, its all there, here is a direct quote.

quote 14
2008 opr.guide.(lost it, huh?) Accord. non satellite Rad

Quotes:
Your vehicle's audio system may disable itself if it is disconnected from electrical power for any reason.
To make it work again, you must enter a specific five-digit code with the preset buttons.
Because there are hundreds of number combinations possible from the five
digits, making the system work without knowing the exact code is nearly impossible.

You should have received a radio code card that lists your audio system's code and serial numbers. {glove box find}
It is best to store this card in a safe place at home. In addition, you should write the audio system's serial number in this owner's manual.

If you lose the card, you must obtain the code number from your dealer.
To do this, you will need the audio system's serial number.

If your vehicle's battery is disconnected or goes dead, or the radio
fuse is removed, the audio system will disable itself. If this happens,
you will see ''ENTER CODE'' in the frequency display (on the screen on models with navigation system) the next time you turn on the system.
Use the preset buttons to enter the five-digit code. The code is on the radio code card included in your owner's manual kit.
When it is entered correctly, the radio will start playing.

If you make a mistake entering the code, do not start over; complete the
five-digit sequence, then enter the correct code. You have 10 tries to enter the correct code.
If you are unsuccessful in 10 attempts, you
must then leave the system on for 1 hour before trying again.

The system will retain your AM and FM presets even if power is disconnected. {only on newer cars'

General information on Honda and DIY:

{the code can be obtained from any Honda dealership (you must give him/her your radio serial number (sticker off radio)"}
or any locksmith with a license from..NASTIF

Honda1 ServiceExpress (Same info as ISIS)

Acura ISIS (Dealer version w/ advanced search)

http://nastf.org/i4a/pages/index.cfm?pageid=3462

The reset code for many Honda products is found in the glove box. Open the glove box and on the back of the door you should see a small sticker with two sets of numbers on it. The number set with 5 digits is your radio reset code. When you get the message "code" enter the numbers in sequence using the radio preset buttons. If entered correctly, your radio shoud turn on immediately.

God Bless and good luck

The reset code for many Honda products is found in the glove box. Open the glove box and on the back of the door you should see a small sticker with two sets of numbers on it. The number set with 5 digits is your radio reset code. When you get the message "code" enter the numbers in sequence using the radio preset buttons. If entered correctly, your radio shoud turn on immediately.

God Bless and good luck

The code is specific to your vehicle and your radio. Go to https://www.ahm-ownerlink.com/login.asp?page=%2Fprod%5Fhome%2Easp and sign your CRV up on the Honda Owner Link. There with the VIN# of your car and the serial # off the radio you can get the 5 digit radio code. Pressing 1 & 6 on the radio give you the serial #.

The reset code for the factory installed radio is on a sticker in the glove box. The sticker has 2 set of numbers. The number set with 5 digits is the reset code for your factory installed radio.

I own a 2002 Honda CRV. I bought it used and all owners manual was provided with the purchase. I lost power to the car's system and the radio set itself in an anti-theft mode requiring a code to get the radio to function again. I tried pushing several buttons without succees.
I need your help to put the right code!!

Your car’s audio system will disable itself if it is disconnected from electrical power for any reason. To make it work again, you must enter a specific five-digit code in the Preset buttons. Because there are hundreds of number combinations possible from five digits, making the system work without knowing the exact code is nearly impossible.
You should have received a card with your manual(if you have one) that lists your audio system’s code number and serial number. If you don't have the card, you can get the code number from your Honda dealer, but to do this, you will need the system’s serial number. (you can try the following to get the serial number, but I don’t know if it will work. To access the serial number, turn the radio on. It must display ‘‘CODE’’, then turn the radio off. Push the preset 1, preset 6, and power buttons at the same time, then quickly release.)

If your car’s battery is disconnected or goes dead, or the radio fuse is removed, the audio system will disable itself. If this happens, you will see ‘‘Code’’ in the frequency display the next time you turn on the system. Use the Preset buttons to enter the five-digit code. If it is entered correctly, the radio will start playing.
If you make a mistake entering the code, do not start over; complete the five-digit sequence, then enter the correct code. You have 10 tries to enter the correct code. If you are unsuccessful in 10 attempts, you must then leave the system on for 1 hour before trying again.
Hope this is helpful.

Have you checked the original owners manual? Had this happen with my CRV. The number will be a 5 digit number and will probably be written in the information at the very front of the manual. Try any 5 digit numbers that you see there. Thats how I got mine working again. Good luck.

You only get like 10 tries this means you made to many attempts trying to put the wrong code in. Disconnect the battery cable and then try putting the code in the radio again.