Question about 1997 Chevrolet Cavalier

I want to know how i can tell if my cam sensor is bad on 97 chevy cavalir z 24 with 2.4

Add Your Answer

Upload

Upload an image from your computer

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

Loading...

Include an image. It's worth a thousand words.

prev next

Related Questions:

1 Answer

Where is cam shaft sensor location on 97 chevy c1500 5.0

It is in the distributor assembly. It is also known as a hall effect sensor or pick up.

If you need further help, reach me via phone at https://www.6ya.com/expert/steven_a67ead41eb5fc62a

Jul 25, 2016 | Cars & Trucks

2 Answers

I get a fault code 24 what is it telling me is wrong with my car and what does 24 mean in fault codes

That code is for the air intake temp sensor. It has failed, is dirty or loose.

Jun 03, 2014 | 1992 Toyota Paseo

1 Answer

Where is cam sensor on a 97 Chevy cavalier

here is a link showing where it is located and how to get to it
http://www.freeengineinfo.com/cam-position-sensor-replacement.htm

Sep 19, 2012 | Cars & Trucks

1 Answer

1997 chevy cavalire 2.2 , 5speed stalls and dies at stop sgns and red lights, but will usually start right back up if I turn the off before trying it again.

fit a fuel pressure gauge and check the pressure, if low check fuel filter and fuel regulator if they are ok replace the pump

Apr 03, 2017 | Cars & Trucks

1 Answer

I have a 97 chevy z71 it has a 5.7 vortec i replaced the distributor and cam shaft position sensor and it is running rough...i know i timed it right ...it was top dead center...any suggestions

The timing cant be adjusted, you will need a scan tool to set Cam ****** Offset. it should be set to "0" above 1300 rpm.

Sep 06, 2011 | 1998 Chevrolet K1500

2 Answers

My 02 chevy cavalier turns over but will not start. I have replaced ever thing i know that could be wrong.

does it produce fire does the gas pressure rise does the crank sensor and cam sensor work

Feb 09, 2011 | Chevrolet Cavalier Cars & Trucks

2 Answers

I have a 97 saturn sc2 DOHC 1.9L. My problem is I have a check engine light that gives a code that says my camshaft position sensor is bad. I haven't been able to locate the thing. I'm wondering if my car...

check Answers.com they will tell you where it is faster than I can Good luck

Dec 07, 2010 | Saturn SC2 Cars & Trucks

1 Answer

Where are the cam sensors (2) located on my 2005 chevy colorado

I have a 2005 and the things that go bad on it is when the sensor goes off then for the intake then where the butterfly is on the intake gets dirty and needs to be cleaned it is the venturi gets dirty and needs to be cleaned and if it is a cam crank then it is the cam actuator that needs fixed you can tell if you take it off and there a screen missing it is a good sign that it needs be replaced and it is on the left side of the engine you need to understand that if it gives you a code that tells you that it is a sensor that is telling you that what the sensor looks after is bad not the sensor

Apr 11, 2010 | 2005 Chevrolet Colorado

1 Answer

Tahoe 97 Fuel problems

Crank sensor has to be bad,or the ignition module.Remove the ignition module and have it checked at the parts store.If it checks bad,replace it,if it checks good replace the cranksensor.The cam sensor,cranksesor,and the control module control injector pulse,and coil spark.I would point more to the ignition module.But I have known the crankshaft sensor to do this also.I hope this was helpful,if so,let us know,thanks,and good luck.

Oct 06, 2009 | 1997 Chevrolet Tahoe

2 Answers