Diagnosing 96 mazdab3000 camshaft sensor

I think some people (myself included) are confused between camshaft and crankshaft position sensors. I believe their are 4 camshaft position sensors in 2 banks, I’d like to know all these locations as I have p0014 and p0021 corresponding to both banks of CAM shaft sensors. Where are these locations please? I have 2009 Enclave also.

There aren't any bearings for the cam shaft. The cams are held in place by the head and the caps. Both aluminium. If you have slop here, replace the heads. Engine size would help.

I have a 96 mazda van and although I was getting camshaft position errors, it does not even have a camshaft sensor. It generates the signal from the distributor location.
BUT I do not know if the same is true for your Tahoe. Find a repair manual in a library and look it up if you don't get a helping answer here soon.

Camshaft position sensor gives the position of cam related to the engine crankshaft which is useful for the fuel supply; ignition, injection, valve opening and closing system. Magnetic type sensor is used on the timing cover over the camshaft gear. Camshaft position sensor is same as that of crank shaft speed sensor in terms of construction and working. (Source: http://www.theautopartsshop.com/carsystem/what-is-camshaft-position-sensor.html)

Have you ever replaced the timing belt?? If not the problem is likely to be a loose worn out timing belt. A floppy belt will play havoc with the sensor signals and trigger a check engine light and a camshaft sensor code.

In this case the solenoid needs to be replaced.The error code in this case is P1533.This code is many a times noticed on Mercedes Benz.
Click this link to go through the replacement procedure of adjustable solenoid:-----http://technoanswers.blogspot.in/2012/02/how-to-replace-adjustable-camshaft.html
-----------Also i recommend you to go through this additional help links for more help:-----Crankshaft and camshafts timing marks?http://technoanswers.blogspot.in/2012/02/crankshaft-and-camshafts-timing-marks.html
dual over cam timing mark details?http://technoanswers.blogspot.in/2012/02/saturn-vue-30-dual-over-cam-timing-mark.htmlHow to Inspect Camshaft?http://repairhelpcenter.blogspot.in/2012/02/how-to-inspect-camshaft.html
camshaft Timing specifications?http://technoanswers.blogspot.in/2012/02/ford-mondeo-st220-camshaft-timing.html
Camshaft, Bearings & Lifters Replacing ?http://howtobyme.blogspot.com/2011/12/camshaft-bearings-lifters-replacing-on.htmlCrankshaft Damper Replacement?http://schematicsdiagram.blogspot.com/2011/12/crankshaft-damper-replacement-on-honda.htmlCamshaft Position (CMP) Sensor replacing?http://schematicsdiagram.blogspot.com/2011/12/gmc-camshaft-position-cmp-sensor.html
Crankshaft Front Seal?http://schematicsdiagram.blogspot.com/2011/12/crankshaft-front-seal.html
How test cam shaft? Testing Car Camshaft?http://repairhelpcenter.blogspot.in/2012/02/how-test-cam-shafttesting-car-camshaft.html
Problem with cam synchronizer?http://technoanswers.blogspot.in/2012/01/problem-with-cam-synchronizer-on-1996.html
How to service Cam Shaft? Camshaft servicing?http://repairhelpcenter.blogspot.in/2012/02/how-to-service-cam-shaft-camshaft.html
How to replace Camshaft? Replacing Vehicles CamShaft Assembly?http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-camshaft-replacing.html--------This will help.Thanks.

For camshaft timing spec,click the link below :----Ford Mondeo ST220 camshaft Timing specifications? http://technoanswers.blogspot.in/2012/02/ford-mondeo-st220-camshaft-timing.html
-------This will help.
Also check this related help links:---

How test cam shaft? Testing Car Camshaft? http://repairhelpcenter.blogspot.in/2012/02/how-test-cam-shafttesting-car-camshaft.html
----------How to Inspect Camshaft? http://repairhelpcenter.blogspot.in/2012/02/how-to-inspect-camshaft.html
------------Crankshaft and camshafts timing marks? http://technoanswers.blogspot.in/2012/02/crankshaft-and-camshafts-timing-marks.html
----------Camshaft, Bearings & Lifters Replacing ? http://howtobyme.blogspot.com/2011/12/camshaft-bearings-lifters-replacing-on.html
---------Camshaft Position (CMP) Sensor replacing? http://schematicsdiagram.blogspot.com/2011/12/gmc-camshaft-position-cmp-sensor.html
------------How to replace Camshaft? Replacing Vehicles Cam Shaft Assembly? http://repairhelpcenter.blogspot.in/2012/02/how-to-replace-camshaft-replacing.html
---------This will help too.Thanks.

It should be mounted to the rear of cylinder head not in the dist. 2 bolts hold it on with a 3 prong connector mounted were the head like a cam shaft cover

Generic OBD II Diagnostic Trouble Codes

DTC CODES P0300 to P0399

P0300....Random/Multiple Cylinder Misfire Detected

P0301....Cylinder 1 Misfire Detected

P0302....Cylinder 2 Misfire Detected

P0303....Cylinder 3 Misfire Detected

P0304....Cylinder 4 Misfire Detected

P0305....Cylinder 5 Misfire Detected

P0306....Cylinder 6 Misfire Detected

P0307....Cylinder 7 Misfire Detected

P0308....Cylinder 8 Misfire Detected

P0309....Cylinder 9 Misfire Detected

P0310....Cylinder 10....Misfire Detected

P0311....Cylinder 11 Misfire Detected

P0312....Cylinder 12 Misfire Detected

P0313....Misfire Detected with Low Fuel

P0314....Single Cylinder Misfire (Cylinder not Specified)

P0320....Ignition/Distributor Engine Speed Input Circuit

P0321....Ignition/Distributor Engine Speed Input Circuit Range/Performance

P0322....Ignition/Distributor Engine Speed Input Circuit No Signal

P0323....Ignition/Distributor Engine Speed Input Circuit Intermittent

P0324....Knock Control System Error

P0325....Knock Sensor 1 Circuit (Bank 1 or Single Sensor)

P0326....Knock Sensor 1 Circuit Range/Performance (Bank 1 or Single Sensor)

P0327....Knock Sensor 1 Circuit Low Input (Bank 1 or Single Sensor)

P0328....Knock Sensor 1 Circuit High Input (Bank 1 or Single Sensor)

P0329....Knock Sensor 1 Circuit Input Intermittent (Bank 1 or Single Sensor)

P0330....Knock Sensor 2 Circuit (Bank 2)

P0331....Knock Sensor 2 Circuit Range/Performance (Bank 2)

P0332....Knock Sensor 2 Circuit Low Input (Bank 2)

P0333....Knock Sensor 2 Circuit High Input (Bank 2)

P0334....Knock Sensor 2 Circuit Input Intermittent (Bank 2)

P0335....Crankshaft Position Sensor A Circuit

P0336....Crankshaft Position Sensor A Circuit Range/Performance

P0337....Crankshaft Position Sensor A Circuit Low Input

P0338....Crankshaft Position Sensor A Circuit High Input

P0339....Crankshaft Position Sensor A Circuit Intermittent

P0340....Camshaft Position Sensor 'A' Circuit (Bank 1 or Single Sensor)

P0341 Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 1 or Single Sensor)

P0342....Camshaft Position Sensor 'A' Circuit Low Input (Bank 1 or Single Sensor)

P0343....Camshaft Position Sensor 'A' Circuit High Input (Bank 1 or Single Sensor)

P0344....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 1 or Single Sensor)

P0345....Camshaft Position Sensor 'A' Circuit (Bank 2)

P0346....Camshaft Position Sensor 'A' Circuit Range/Performance (Bank 2)

P0347....Camshaft Position Sensor 'A' Circuit Low Input (Bank 2)

P0348....Camshaft Position Sensor 'A' Circuit High Input (Bank 2)

P0349....Camshaft Position Sensor 'A' Circuit Intermittent (Bank 2)

P0350....Ignition Coil Primary/Secondary Circuit

Here is a diagram of your motor with the firing order: