SOURCE: my car is leaking water
I had a problem with water also, so I took it to the dealer. It was a clogged drain on the passenger side. I think the one that ran from the windshield wiper area. It took about five minutes fo fix and my dealer did it for free. Not sure if your issue is the same.
SOURCE: where is the fuel filter located in the 2001 mitsubishi galant?
can you tell me where the fuel filter is located on a 01 mitsubishi galant?
SOURCE: How to change the headlight bulb on a 2001 mitsubishi galant?
On either side of the headlight wiring assembly, in the engine compartment, you will find 2 small tabs. They are located to the sides and towards the bulb of the plastic assembly. Press these 2 tabs in while pulling the wire assembly out. Remove the rubber gasket and unhook the wire spring holding the bulb in place. The bulb come right out. The bulbs are halogen so do not handle the new bulb by the glass.
SOURCE: 2001 mitsubishi galant shaking while in idle
Check your motor mounts, recently engine idled rough when in nuetral or stopped in drive, also jerked when put in reverse. took it to a automotive shop and found motor mounts cracked. Runs great now
SOURCE: diagram for serpentine belt on a mitsubishi galant es
My sincere apologies for the severely delayed response.
I am going back to answer - unanswered questions. I have only been on this site for the past 4-months. Questions Posted have exploded (+55%) since joining.
I do not know if you still need this information, but I am answering it anyway. You may want to Print the Diagrams for future use.
CLICK on the following LINK. It has the Belt Diagrams you will need.
If you would: Before Clicking: Let me know if this helped you, or if you have any additional information or questions. Feel Free to contact me at FixYa.com!
Again my sincerest apologies...
Thanks.
http://www.2carpros.com/car_repair_information/year/2002/make/mitsubishi/model/galant/2002_mitsubishi_galant_drive_belt_routing_diagram.htm
2
3
Hold the rear of the headlight socket and turn it counterclockwise to unlock it. Pull the headlight socket and bulb from the headlight assembly.
4
Grab the bulb and pull it from the socket with a slight wiggling motion.
5
Pick up the new 9003 headlight bulb using a clean, lint-free cloth and line up its prong with the slots in the socket. Never tough the bulb with your bare hands, as the oils left by your hands can cause the bulb to burn out prematurely.
6
Slide the socket and new bulb into the headlight assembly and turn the socket clockwise to lock it into place.
7
Place the plastic cover behind the bulb and turn it counterclockwise to lock it into place.
8
Repeat Steps 1 through 7 for the headlight bulb on the other side of the Galant, if needed.
9
Read more: How to Put in a Headlight Bulb on a 2000 Mitsubishi Galant ' eHow.com http://www.ehow.com/how_8210819_put-bulb-2000-mitsubishi-galant.html#ixzz27iQwCdOe
42 views
Usually answered in minutes!
×