Cars & Trucks Logo

Related Topics:

Roger Glatzhofer Posted on Jan 04, 2017
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

97 caddy codes show cam timing is off causing rough idle. How do I adjust for that?

×

1 Answer

Marvin

Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

  • Cars & Trucks Master 85,242 Answers
  • Posted on Jan 04, 2017
Marvin
Cars & Trucks Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Top Expert:

An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

Joined: Jun 20, 2008
Answers
85242
Questions
28
Helped
29036979
Points
266281

Code P0300 is not a timing code at all , it is a "Random Engine Misfire" code. Timing is computer controlled and no adjustment is required or provided for by the way. Follow the link for more info on the fault code P0300
https://www.obd-codes.com/p0300

5 Related Answers

ourhowse

Dar

  • 2007 Answers
  • Posted on Jul 03, 2009

SOURCE: engine starts,reaches high rpm,then slowly returns

Vacuum leaks. Check all hoses and intake bolts. Leaking EGR or plugged PCV valve. Air filter plugged. Leaking head gasket. Worn timing chain. Camshaft lobes worn. Valves burned or leaking. Fuel idle control system or sensor. Good luck!

Ad

Anonymous

  • 11896 Answers
  • Posted on Jul 29, 2009

SOURCE: 97 galant low idle in park or in gear at stop

double check your vacuum hoses, fuel filter, plugs and wires and air filter.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Aug 14, 2009

SOURCE: Buick Century 97 runs rough and stutters when cold and gas applie

start by replacing the plugs and plug wires, this is esp true if car has over 100,000 miles on it. damp air can make the problem worse.

Testimonial: "helpful"

Anonymous

  • 288 Answers
  • Posted on Apr 02, 2010

SOURCE: u i have a 97 ford escort that idles rough so i

Often, on the Escorts of this vintage, rough idle can be due to a leak in the vacuum system. With the engine running, listen closely for any tell-tale hissing sounds coming from any of the vacuum hoses. Check that they are all securely in place and the end-clamps are all tight. Also check that the PCV valve and the hose connecting it to the manifold are securely in place. Another possibility is the Idle Air Control (IAC) valve. If it is clogged or sticking, it can cause rough idle. Refer to a service manual to diagnose the IAC valve. Other things to check: make sure that the air intake is unobstructed and clean. You might consider cleaning the manifold and throttle body. Check the air filter and replace if necessary. Let me know if you have any other questions.

Anonymous

  • 7353 Answers
  • Posted on Jun 27, 2010

SOURCE: rough idle

what was the code?

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

My 97 Thunderbird is rough idling. I cleaned the bank 1 02 sensor and it still has a rough idle. I can floor it and the idle goes away.

You don't clean O2 sensors , if bad you replace them . An only if there is a DTC - diagnostic trouble code or you check out O2 sensor performance with testing , using scan tool , lab scope or multimeter . A rough idle is usaully caused by a vacuum leak , a engine misfire , IAC - idle air control air passages clogged . There are videos on youtube on how to test to find rough running problems .
0helpful
1answer

2004 ford f150 5.4 3v idles rough but clears when rev engine up

Does you f 150 have electronic throttle control ? An does it have Variable Cam Timing (VCT) - if it does have Variable Cam Timing (VCT) it doesn't have an EGR valve ! What type scan tool did you use to pull the code with ? My FORD factory service information does not show that code for A 2004 F - 150 5.4 L 3 valve engine !
0helpful
2answers

Ruff ideal ,no power,was told it could be a cam oxygen sensor or cam cylinoid any ideas?

rough idle can be the cam and crank sensor or the timing has shifted from weak timing belt/auto adjuster. also the idle valve on intake is sticking or and fuel pressure valve is not working properly if engine runs fine at speed then the adjuster on timing belt can be the fault, as the pressure on the engine turning the cams is putting the right pressure on the belt. if it is through the hole speed ranged the fuel pressure could be low. if engine goes in to limp mode or takes time to speed up it can be timiming alinment out and or the cam sesor or crank sensor.
1helpful
1answer

2003 nissan maxima p0021 bank 2 cam timing 40 degrees advanced at idle

To review - - the intake valve solenoid valve controls the flow of oil thru the control valve to adjust valve timing.
The code means the computer "sees" the valve timing as out of range and/or not controllable.
Possible causes could be a defective or stuck solenoid valve, dirty oil causing a blockage, a faulty cam sensor or faulty crank sensor.
Other than changing the oil and filter, the components would need to be checked with a scanner that can look at live data.
1helpful
1answer

Really rough engine idle at cold start up,, reving the engine seems to smooth it out,,,,

Some causes about rought idle could be:
- Valve adjustment
- Incorrect ignition timing,
- Vacuum leaks
- Bad ignition wires (Test w/ ohmmeter)
- Incorrect idle speed
- Cold Start Injector always "ON" (Revised injector time switch avail.)

A source of rough idle in EFI engines is air leaks or vacum leaks these leaks will upset the fuel mixture without triggering any codes. A bad oxigen sensor will also cause a rough idle, but you should see a code for it ( I think is number 5, but check it).

A good place to start would be an inspection of the spark plugs, plug wires, ignition timing, and idle speed. Next would be valve adjustment. Don't overlook the simple things.

Hope this helps, keep us updated and just keep in mind that your feedback is important and I'll appreciate your time and consideration if you leave some testimonial comment about this answer.

Thank you for using FixYa.
0helpful
1answer

Check engine light is lit and error code is identified as P1383 unidentified code

Hi.

P1383 is one of Jaguar's own codes. You can find the code even in other engines (e.g. Ford). P1383 means : Variable Cam Timing Overretarded (Bank #1).

Symptoms:Rough idle, engine stalling.

Here possible causes:

  • Cam timing improperly set.
  • Continuous oil flow to the VCT piston chamber.
  • VCT solenoid valve stuck open.
  • Camshaft advance mechanism binding (VCT unit).

  • Solution: the part in the Variable Cam Timing listed above must be tested and repaired.

    Regards.

    Ginko
    1helpful
    3answers

    2003 cadillac cts 3.2 liter..rough idle, scan tool shows misfire on bank 1, cylinders 1,3,&5. only at idle, scan tool also showed a cam postion sensor code. cam position sensor changed. no change in...

    Did you ever find a solution to this? I am having the same issue on 2,4,6. I have replaced the coils. checked the intake for vacuum leaks. I am lost here let me know if you find anything and I will do the same.
    1helpful
    2answers

    Rough idle

    what was the code?
    2helpful
    1answer

    1996 Honda Accord Rough Idle Even After tune up performed Changed spark plugs, distributor cap and rotor wheel along with all spark plug wires, changed fuel filter, air filter, spent $150 on fuel injector...

    Perform a valve clearance inspection and adjust if necessary. Tight or sticking valves will cause a misfire or rough running concern. Note: Perform valve adjustment when the engine is stone cold. 4cyl: INT 0.26mm EXH: 0.30mm (V6 engine are hydraulic and no adjust necessary.) Also check for a sticking or stuck open EGR valve. For diagnostic purposes only: Remove the EGR valve. Place a business card over the EGR passage and bolt the EGR valve back on. This plugs the EGR ports and if the misfire goes away the EGR valve is partially stuck open and is defective.
    Check for low fuel pressure. Check for low compression. Check cam timing. Check for a weak ignition coil. Also don't over look the possibility of worn or broken engine mounts which cause excessive engine movement and engine vibration. -hope this helps
    0helpful
    1answer

    99 chevy tracker is running very rough at idle

    yes both of these items can cause your problems
    Not finding what you are looking for?

    74 views

    Ask a Question

    Usually answered in minutes!

    Top Cars & Trucks Experts

    ZJ Limited
    ZJ Limited

    Level 3 Expert

    17989 Answers

    john h

    Level 3 Expert

    29494 Answers

    Arnie Burke
    Arnie Burke

    Level 3 Expert

    7339 Answers

    Are you a Car and Truck Expert? Answer questions, earn points and help others

    Answer questions

    Manuals & User Guides

    Loading...