Question about 2002 Kia Rio

Open Question

2002 kia rio camshaft caps specs - 2002 Kia Rio

Posted by Quintez Leeks on

Ad

5 Related Answers

Anonymous

  • 35 Answers

SOURCE: Replace Ignition Coil - Kia Rio 2002

must dismantle all wires and battery...

Posted on Sep 24, 2008


Anonymous

  • 1 Answer

SOURCE: Kia Rio 2002 - Car not response when press gas

can anyone tell me how to change the time belt on my kia rio cinco

Posted on Oct 02, 2008

Ad

Anonymous

  • 4 Answers

SOURCE: resetting airbag on 2002 kia rio

Typical code readers (OBDII) won't touch the airbag lights. Neither will disconnecting the battery and waiting. If the airbag light is flashing, there's a code involved. The system may or may not work when needed. If it's on steady, the system is failed and will not deploy when needed. Typically, it's a connector in the various harnesses involved. Unfortunately, the Kia shop manuals just say "replace everything" so they're no help. The dealer has the very expensive code reader to read & reset the airbag light. In other words, $$$.

Posted on Jan 03, 2010

roniecon

Ronny Bennett Sr.

  • 6963 Answers

SOURCE: where's the camshaft position sensor on a 2003 kia

On the rear of the head

Posted on Mar 21, 2010

Roger Foster

  • 701 Answers

SOURCE: what is the proper spark plug gap setting for a 2002 Kia Rio

Hello mfriesner71; my name is Roger and I will answer for you. The correct plug gap is 0.027 to 0.031.in. Any gap between these will work fine. Just make sure they all gap the same. Should you need further help please just ask. Please rate the answer. This way I know it was helpful. Thank You for using Fix Ya. Roger

Posted on Apr 30, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
2answers

Check engine light is on 2002 kia rio

the check engine light comes on to tell you there is a problem with something the computer controls or receives info from. Have the computer scanned for codes. Once you have those codes post them here and I'll be happy to help you further.

I’m happy to assist further over the phone at https://www.6ya.com/expert/jeremy_d728a59f986299fa

0helpful
2answers

2002 kia rio 1.5 liter DOHV .both cam sprockets were head rebuilt.i need to know direction of dowl on intake & exhaust camshafts before installing sprockets.should dowls be up,down.one up & one...

Aligning the dual-cam pulleys - YouTube

? 3:22
https://www.youtube.com/watch?v=DPcoLEHEt1I
Nov 30, 2010 - Uploaded by JT
me trying to figure out how to realign the dual-cam pulleys that shifted when I removed the timing belt, shifted ...

2002 KIA Rio 1.5 Liter Timing Belt Replacement - YouTube

? 14:47
https://www.youtube.com/watch?v=jLkdnkFW9c0
Aug 10, 2012 - Uploaded by TheBGravit
Replacing the timing belt on my 2002 KIA Rio. ... Hubitools Universal Timing Gear Clamp - Duration: 1:26. Hubi Tools 618,464 views. 1:26. How to Align the Camshaft if My Timing Belt Broke : Timing Belts & Other Auto ... Kia Spectra Timing Belt Replacement - 1.8L DOHC Engine Part 1 - Duration: 11:36.

How to Align the Camshaft if My Timing Belt Broke : Timing ...

? 4:10
https://www.youtube.com/watch?v=yKFAmfeaycs
May 21, 2013 - Uploaded by ehowauto
Subscribe Now: http://www.youtube.com/subscription_center?add_user=ehowauto Watch More: http://www ...


0helpful
1answer

WHERE IS THE CAMSHAFT POSITION SENSOR ON A 2004 KIA RIO/I NEED A PICTURE

I have a 2004 kia rio have replaced the camshaft position sensor twice, and the code keeps coming back after it is reset. It is still running really rough. Is there something I am overlooking?
2helpful
1answer

Torque specs for 1.5 kia rio connecting rod

TORQUE SPECIFICATIONS kia rio
Cylinder Head Bolts:
(21.7ft.lb) or (3.0kgf.m) 90?
0helpful
1answer

What is the toque for the cam shaft bolts on a 05 kia rio 1.6L

This is for 1.5L & 1.6L (VIN 5) Engines

Tighten the bolts, to 8–11 ft. lbs. (11–15 Nm).


This is for 1.6L (VIN 3) & 2.0L Engines

Install the camshaft and bearing caps. Tighten the bearing cap bolts to 10.5 ft. lbs. (14 Nm).
0helpful
1answer

Kia sedona 2002

You should begin tightening from the middle and work your way out on each camshaft: Tighten the bearing cap in two or three steps. Tighten it to the standard torque at the last stage. *Bearing cap standard torque Torque
16 pieces at the both ends : 18.6 - 20.6 N·m
(190 - 210kg·cm, 13.7 - 15.2 lb·ft)
24 pieces in the middle : 10 - 12 N·m
(100 -120kg·cm, 7.38 - 8.85 lb·ft)
0helpful
1answer

Kia rio 2002 camshaft pos. sensor just replace still light check

check the belt,if its out it will flag up this code,your car will run on sequential firing from the crankshaft sensor,failing that put an oscilloscope on the signal wire at the sensor and ecu its possible the ecu might not be seeing the signal,start with the basics first
Not finding what you are looking for?
2002 Kia Rio Logo

Related Topics:

69 views

Ask a Question

Usually answered in minutes!

Top Kia Experts

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6963 Answers

Brad Brown

Level 3 Expert

18852 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15000 Answers

Are you a Kia Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...