1999 Chrysler LHS Logo

Related Topics:

t
todd morrison Posted on Dec 29, 2016

99 chrysler lhs, No temp door, mode door function, will not perform self test.

  • todd morrison
    todd morrison Dec 29, 2016

    has atc and will not perform self test, only flashes, temp door and mode door do not function, fan speed is adjustable.

×

5 Related Answers

Anonymous

  • 1010 Answers
  • Posted on May 15, 2008

SOURCE: Chrysler LHS o2 sensor testing

If u know u have a bad o2. I guess u must have used a scanner or equivalent. There are 4 o2s on LHS. The way u can tell the difference is by the # sequence that the failure code is giving u. For example the o2s on the right side are even # on the left odd #. Pre cat is 1 after cat is 2. So if u have bad 2/2 Than u know it's right rear or a bad 1/1 is left front ect ect. First make sure u have the right code. With out a scanner. it can be done with a volt meter or a vantage, but it's a heck of a lot easier pulling the codes.

Ad

Anonymous

  • 4 Answers
  • Posted on Jun 22, 2009

SOURCE: chrysler LHS won't start!!

the starter is on the right side of the motor down below the the air intake bolted to the transmission three bolts and it comes off

Anonymous

  • 8 Answers
  • Posted on Jul 03, 2009

SOURCE: Chrysler LHS 99 won't turn over

bad starter

Anonymous

  • 18 Answers
  • Posted on Oct 25, 2009

SOURCE: I own a 1996 chrysler lhs, and my radiator engages

if the ac clutch is on the fan should come on ,turn ac off and see if you get the same result ..

Philip Armitage

  • 437 Answers
  • Posted on Oct 28, 2009

SOURCE: my 99 chrysler lhs is running hot and and leaking

cooling fan is probably not coming on. if this happens then it will run hot and over heat. start car and let it reach idle temp. @ 110 degrees celcius watch for cooling fan. if it doesn't come on then check for fuses and see if fans get power.

Ad

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
2answers

2002 Infinity i35. Fan on heater quit how can I find the problem?

The most common reasons an INFINITI I35 heater isn't working are a broken heater blower motor, a problem with the thermostat, or a failed heater blower motor resistor.

INFINITI I35 Heater Is Not Working - RepairPal.com

..
0helpful
1answer

99 chrysler lhs new doors new ignition,anti theft wont allow to start car what to do

Same key as always? If you changed the ignition and key, it has to be programmed to match the ECM.
0helpful
1answer

What can I change to get my 99 Chrysler lhs out of limp mode,TCM?in and out speed sensors? And what else if anything?

Have your ecu scanned for DTCs. I've had more than a few Chrysler ECUs go bad. They even have a special code for a defective computer. They're definitely designed to be worked on by Chrysler dealers.
0helpful
1answer

How to fix my 99 chrysler lhs abs light comes when i drive 15 mph ?

You would need someone to check for trouble codes in the abs system to proceed with testing. It could be a wheel sensor or a wiring problem.
0helpful
1answer

1998 chrysler LHS, I lost my original set of keys along with the remote unlock, I have a spare made by walmart and it only unlocks the door and starts the car if it a certain way, I had the car locked and...

you need to get a key made by the dealship and reprogrammed. i had a 999 chrysler lhs in my shop ,and I lost the key,and I had to send to the dealership
0helpful
1answer

Chrysler LHS won't start!!

the starter is on the right side of the motor down below the the air intake bolted to the transmission three bolts and it comes off
1helpful
2answers

How do i shut off or disengage the alarm system on a 1996 chrysler lhs ligths flash ,horn honks, and car will not stay running. i do not know why alarm set it self do not remoteless entry key pad so i am...

Man,I just bought a 96 chrysler lhs(salvage title) and we drove it home...Had no keypad.My girl and I got out and she left her purse...I opened the door and that car started honking and everything...Alarm wouldnt cut off so,What i did was go to the driver's door,Put the DRIVING KEY IN THE LOCK and locked and unlocked the door...Then,the alarm went off.Try that and if it doesnt work...Try to use those buttons.
1helpful
1answer

Need of programming instructions for keyless entry for 1996 LHS

System operation
System will automatically lock all doors when vehicle is driven in excess of 15 mph
Pressing UNLOCK (on remote) once deactivates system and unlocks driver door only
Pressing UNLOCK (on remote) twice w/in 5 seconds deactivates system and unlocks all doors
Alarm/central locking functions can be altered using remote transmitter


Programming

Access data link connector (DLC)- druvers sude fascia
Switch ignition on
Jump DLC terminal 1 and ground
Ensure doors lock and unlock, indicating programming mode active
Press any button of each remote to be programmed
Ensure doors lock and unlock after each remote operation - indicating programming complete
Remove jump lead to exit programmming code

A maximum of two remotes can be programmed
0helpful
2answers

Chrysler LHS won't start!!

Driver side at rear of engine next to oil pan goes into the bell housing.
5helpful
2answers

Driver side ac not cold

It is not a coolant leak. Nice try though. It is possible that the infra red temp sensor is faulty, also it may be a mode door(directs air flow in the heater box) or a mode door actuator. Your dealer can test for proper door actuation, and can also check temperature difference, some is not uncommon, but it depends on the temp setting, is this a dual zone, or tri-zone atc unit?
Not finding what you are looking for?

62 views

Ask a Question

Usually answered in minutes!

Top Chrysler Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

john h

Level 3 Expert

29494 Answers

Are you a Chrysler Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...