Vacuum hose diagram 93 probe - 1993 Ford Probe

USA CAR?
FEDERAL.
OR CALIF, SMOG RULES NOT TH SAME.
NOR VACUUM DEVICES .

READ IT HERE.? OR BUY A USED HUGE 500PAGE
MANUAL OFF EBAY>? NO DIGITAL BOOKS THEN.
THIS MAY COVER IT.
https://eautorepair.net/Marketing/Default.asp

mitchells DIY (google it....)
log in and read?
and be lots more than only vacuum on that ISUZU Impulse (clone)
for SURE.
vacuum can be different in Canada than USA and in California.
(smog laws dictate all vacuum devices, most)
no country stated, in USA?, then use mitchells.
EGR and evap are diffr.

The vacuum hose diagram is under the hood, if it is lost or removed contact a local smog inspection shop or check with your local library they may have the information and diagrams.

Ghost, Check the attached links vacuum line diagrams for 1993 4.3 vortec, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Repair Guides Vacuum Diagrams Vacuum Diagrams AutoZone com
4 3 vortec vacuum diagram Google Search

Check this...



Fig. 49: Vacuum hose routing-1993-95 3.3L and 3.8L engines

Hope this helps (remember to rate ths answer).

You have a problem with the main ground at the battery. Might not be hooked to the engine.

rate a sfixya if this helps.

96 probe 2.0L. don't have 93, but simliar

When the air only blows out of the floor and defrost regardless of the selected route, it is defaulting. It means there is a problem. Most likely a vacuum leak. I have a 97 S10 that this happened to. I replaced a few vacuum hoses under the hood..One of which was not connected to anything, nor could I figure out where it was suppose to be connected, so I just plugged it..Added a little freon, and the air works wonderfully. Hope this helps..