At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.
Re: I need the torque specs for flywheel bolts on a...
You will need the torque specifications for the renault engine not nissan
the bolts may be different sizes and incorrect torque readings may snap off the bolts
- If you need clarification, ask it in the comment box above.
- Better answers use proper spelling and grammar.
- Provide details, support with references or personal experience.
Tell us some more! Your answer needs to include more details to help people.You can't post answers that contain an email address.Please enter a valid email address.The email address entered is already associated to an account.Login to postPlease use English characters only.
Tip: The max point reward for answering a question is 15.
Here are the torque specs for the Nissan 1400 engine:
Main bearing cap bolts: 58-65 Nm (43-48 lb-ft)
Connecting rod cap bolts: 24-28 Nm (18-21 lb-ft)
Cylinder head bolts: 40-45 Nm (30-33 lb-ft)
Rocker arm shaft bolts: 20-25 Nm (15-18 lb-ft)
Flywheel bolts: 85-95 Nm (63-70 lb-ft)
Note that these are general torque specs and may vary slightly depending on the specific year and model of the Nissan 1400 engine. It's always best to consult the factory service manual for the exact torque specs for your engine.
I have been working on cars for over 40 years and ASE certified and have never used torque specs on a pressure plate or Torque convertor I will put a breaker bar and socket on the harmonic balancer bolt on the front of the engine resting it up against the frame you should also use blue Loctite on pressure plate bolts then tighten them up in a star pattern be sure to have alignment tool in in place so the clutch disc is aligned in the center pressure plate the specs for tightening bolts are PFT
Some fixya user told me a website reliablestore it is very good.. I used it to repair my shredder it had some spark issue which wasn't easily fixed. you can go there and try
there are 2 sets of torque specs for flywheel bolts as there are 2 different fly wheels in use with different bolts for each
go google and type in--torque specifications for nissan navara flywheel bolts and fins a site relevant to you application
it could be 61-69 ft/lbs a or 90 ft lbs depending on the flywheel and the vehicle 2wd or 4wd
×