Will tites and rims off of avalon fit a 92 chevorolet s10

Where is the engine, or where is the manual transmission?

go an chec for any disconnections in engine area--u may hav belts too tite and with an old battery-hard to turn

The ECM on a 1992 S10 and S10 Blazer is located below the glove box.

go to this web site it is free

http://arrc.epnet.com/autoasp/index.asp?sid=101932511&uid=ns011811.main.autorefctr

hope this helps let me know

Your only half right. hub sizing and hub centric or lack thereof will make or break what fits and what won't. Bolt pattern is just one of many things to look for. Adapters may be needed.

Also keep in mind that offsets might not be the same, and will greatly affect your caliper / shock / fender lip clearance.

Look at the tires and rims, look for any damages to the wheels and then check the steering and suspension parts. Any parts damaged or worn needs to be replaced and you may need the truck wheels checked for alignments. Good luck and keep me posted and make sure all you tires are at proper inflation of 32 PSI.

Sorry no they won't fit. S10 are 5 on 4.75 positive offset. You can put older wheels from many older chevys on them but they will stick out of the wheel wells if you have 4x4. The Wrangler are 5 on 4.5 negative offset.

no go to a junk yard and they will tell you what will fit

no they will not, differnt bolt pattern

the bolt hole pattern on a 92 is a 4 lug pattern and a 2004 is a 5 hole pattern. they will not fit.