How do I bleed a 2003 Hyundai Tiburon manually?

SOURCE: 2003 HYUNDAI TIBURON TROUBLE CODE

Hi....

2003 Hyundai Tiburon.

The CODE B1511. Driver SEAT BELT BUCKLE Open circuit or short to battery.
Inspect the Seat belt Receiver Connection Under the Driver SEAT.
Inspect the Seat belt receiver at the Side of the Seat.
If everything look good you will need to replace...

Ok I hope this help on your question.
Thank you for use fixya...

SOURCE: How do I change the tail lights on my hyundai tiburon 2003

Open your hatch and behind the tail lights you will see panels with plastic knobs you can unscrew. Behind there are 3 8mm nuts you need to unscrew which will let you remove the whole tail light assembly. There is a post on the actual tail light assembly that holds it in so you may have to give it a firm pull to actually seperate it from the car. If you have the stock infinity sub you will need to remove that first to get to the drivers side tail lamp.

SOURCE: Location of the Purge Control Valve for 2003 Hyundai Tiburon

There were two different engines which were installed in the 2003 Tiberon... the 2.0 liter 4 cylinder:


And the 2.7 Liter V6:

SOURCE: Need Instructions on 2003 Hyundai Tiburon Clutch Replacement

Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

SOURCE: 2003 Hyundia Tiburon BCM

http://www.newtiburon.com/forums/showthread.php?t=102241&highlight=bcm