Question about 1996 Toyota Camry
Posted by Anonymous on
Yes, you have to remove the door panel.
Remove the 2 plastic protectors on the front edge, and remove the 2 brass colored screws. Next, remove the push pins from the latch side. Push in, and pull out the whole thing. Next, under the armrest, remove the screw. Lift up the power windoe control, being careful to not break the plastic retainer tab. Remove the screw under the window control. Starting at the bottom, pull out the panel, and, when all of the clips are loose, pull the panel straight up. It is best to do this with the door panel as warm as possible, like in a heated garage. Doing this outside in the cold will break all of the plastic retainer clips; they are quite brittle whn cold.
I hope this helps
Thanks for choosing FIxYa for assistance. A FIxYa rating (4 blue diamonds) would be greatly appreciated.
Posted on Feb 23, 2009
My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Posted on Mar 04, 2009
there are plastic covers directly on top of you lug nuts remove with four way or socket clockwise direction these plastic caps will screw off releasing wheel cover. then remove lugs.
Posted on Apr 17, 2009
you can take a screw driver and pry it off. Be careful if you have power windows, if it falls right off then it could pull the wires loose. The panels have clips that clip to the door. Therefore, the only way to get the panel off is to pry it off.
Posted on Mar 07, 2010
the firing order is in fact 1 2 3 4 5 6 the number one cylynder is on the left at the back, as you look at the engine from the front >>
positions of cylinders
1 3 5
2 4 6
Posted on Mar 15, 2010
Tips for a great answer:
Dec 23, 2016 | Pontiac Cars & Trucks
on Apr 26, 2012 | 1996 Toyota Camry
on Mar 20, 2012 | 2002 Toyota 4Runner
Mar 22, 2015 | 2000 Toyota Camry
Mar 31, 2011 | 1986 Toyota Camry
Jan 03, 2011 | 2006 Toyota Highlander
Feb 21, 2009 | 1996 Toyota Camry
Jan 22, 2009 | 1988 Toyota Camry
Jul 04, 2008 | 1995 Toyota Camry
55 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: