Question about 1997 Ford Expedition
There are four o2 sensors on this truck. one on each side just below the exhaust manifold, and one on each side behind the second catalytic converters. (just about even with the back of the front doors.
Posted on Jun 18, 2008
the heater bypass is quite simple, if you look at the firewall you will see two medium sized coolant lines, remove them from the firewall and link them together using a proper sized tube, you can purchase a kit at a parts store quite cheaply
Posted on Oct 11, 2008
The low pressure valve on the 01 expedition is located on the accumulator on the passenger side fire wall. The accumulator is underneath the battery relay and a grouping of wires. Had to squeeze hand underneath a heater hose and an a/c line to remove cap and hook up hose. Nothing has to be removed to locate the valve just a little touchy feely. Valve faces a 45 forward toward the engine.
Posted on Aug 11, 2009
They are round "cans" with wires attached. You should have SSA, SSB, SSC, Torque converter and Pressure Control solenoids. They control pressures and have no mechanical linkage.
Posted on Oct 25, 2009
SOURCE: Heated seats not working.
You should start by checking your fuses under the dash. Should be a small panel under the dash or on the side of it. The panel has a legend which shows the position and title of each fuse.
Posted on Dec 09, 2009
Tips for a great answer:
Aug 03, 2015 | 1997 Ford Expedition
Aug 28, 2014 | 1999 Ford Expedition
Jan 07, 2014 | 2007 Ford Expedition Eddie Bauer EL
Apr 15, 2017 | 1999 Ford Expedition
Dec 22, 2009 | 1997 Ford Expedition
Nov 27, 2009 | 1997 Ford Expedition
Oct 17, 2009 | 1998 Ford Expedition
Jun 11, 2009 | 1997 Ford Expedition
Jun 16, 2008 | 2001 Ford Expedition
158 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: