Transfer case problem
shift solenoid faulty
transmission problem
low oil
pressure low
TCU should have fault codes to read on a 2006
Testimonial: "Changed solenoids. Still doing the same thing oil pressure one oil all good"
was the shift problem there before replacing the solenoids
if no better
can be the TCU not sending to the solenoids
if no fault codes now
then there are internal mechanical problems
Shifting problem happened before the change in solenoids. There was no residue or burnt fluid when changed so I don't think it's mechanical. Sensors also changed at the same time. Still got the codes.
cleared the codes after fitting ?
disconnect battery terminals ?
if cleared and still got the codes TCU faulty or wiring issues
×
258 views
Usually answered in minutes!
×