Cars & Trucks Logo

Related Topics:

M
Margaret fleming Posted on Oct 30, 2016

1992 Scorpio interior lights & horn working but no ignition at all

2 Related Answers

Anonymous

  • 71 Answers
  • Posted on Mar 29, 2009

SOURCE: Horn, interior lights, stereo won't work

horn and dome on same circuit check fuse for voltage on both sides on your stereo you could hook to an ignition terminal in ur fuse box

Ad

Willie Keisser

  • 457 Answers
  • Posted on Aug 01, 2011

SOURCE: Have replaced the battery, and

check your ground wire from battery to fram take it off at frame and clean the frame then put wires back on this is a common prob with honda accords

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

Does a 1992 accord 2.2 engine have horn and radio relays

In the fuse box under the hood or in a box behind glove box.
0helpful
1answer

Since replacing the ignition key cylinder, no tail lights or interior lights work on 1996 Plymouth Voyager

What all did you disconnect ? Did you disconnect any connectors to the BCM - body control module ? All the thing's your having troubles with are controlled by the BCM . The wiper switch is an input to the BCM , the BCM controls the wipers by energizing two different relays . wiper on relay & wiper high low relay .

Since horn didn't work, tried to take off dash ???? Why ? didn't need to do that . Do you know what a relay is ? Horn relay is located in the under hood fuse / relay box . You could have tested right at the relay base - where it plugs in .
VEHICLE RELAYS Operation Diagnosis
0helpful
1answer

Have replaced the battery, and the ignition switch. Car still won't start. Brake lights, and horn work with battery hooked up. Head lights, interior lights and radio, and sound when key is in...

check your ground wire from battery to fram take it off at frame and clean the frame then put wires back on this is a common prob with honda accords
3helpful
1answer

WHAT IS A BTN FUSE ON A 1992 MAZDA MPV . IT HAS SOMETHING TO DO WITH THE HEADLIGHTS OR DIMMER SWITCH I THINK

BTN stands for Body/Tail/iNterior. It protects the HAZARD, ANTENNA, ROOM, STOP, ILLUM and ABS fuses in the cabin fuse box, which in turn protect the hazard lights, antenna, ECU memory, brake lights, tail lights2.gif, ABS, power locks, clock, horn, illumination, stereo, HVAC, interior lights and alarm. smile.gif __________________
0helpful
1answer

1992 pontiac grand prix le interior lights and key buzzer wont go

inside the steering column locate the ignition remove wire to reveal screw to remove ignition that wire is what controls the buzzer and light itthe wire probrally wasnt in place correctly wich caused your problem
1helpful
1answer

Horn, interior lights, stereo won't work

horn and dome on same circuit check fuse for voltage on both sides on your stereo you could hook to an ignition terminal in ur fuse box
0helpful
1answer

Alarm sounds everytime key removed from ignition?

There is a switch either in or on the driver door that turns on the interior lights and tells the module the door is open and the key is still in the ignition, this sounds the alarm, check all the doors and make sure they turn the interior lights on and off when the doors are opened and closed.
Not finding what you are looking for?

31 views

Ask a Question

Usually answered in minutes!

Top Mahindra Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

old marine
old marine

Level 3 Expert

2426 Answers

Ngoro

Level 3 Expert

3521 Answers

Are you a Mahindra Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...