Question about 2003 Hyundai Tiburon GT V6

1 Answer

My 2003 Hyundai tiburon gt v6 (automatic) idles at 500 rpm in drive after warmed up is this normal? It's not throwing codes it just feels like it's shaking a bit

Posted by Austin rowland on

Ad

1 Answer

Bill Boyd

  • Level 3:

    An expert who has achieved level 3 by getting 1000 points

    Top Expert:

    An expert who has finished #1 on the weekly Top 10 Fixya Experts Leaderboard.

    Superstar:

    An expert that got 20 achievements.

    All-Star:

    An expert that got 10 achievements.

  • Hyundai Master
  • 53,816 Answers

500 is too low for and automatic in drive
normal idle is 850-900 and should not drop below 800 in drive as the ECM should be adjusting for the drive load when in gear
take it in to an accredited service shop that works on your make of vehicle and have the problem diagnosed properly and quote

Posted on Oct 28, 2016

Ad

5 Related Answers

Anonymous

  • 1 Answer

SOURCE: 2003 Hyundia Tiburon BCM

http://www.newtiburon.com/forums/showthread.php?t=102241&highlight=bcm

Posted on Jun 22, 2009

Ad

rc

  • 417 Answers

SOURCE: Hyundai Tiburon: Replacing plastic cover that encases everything.

Call around to your local auto wrecker/salvage yards, and check ebay before you go to a Hyundai dealer.

Posted on Apr 19, 2010

Anonymous

  • 1 Answer

SOURCE: my 2004 hyundai tiburon wont start. ive replaced

i have the same problem let me know if you figure it out... it is starting to drive me crazy

Posted on Jun 05, 2010

jturcotte

Jeffrey Turcotte

  • 8984 Answers

SOURCE: my 2003 hyundai tiburon gt

Hi, yes, your MAP sensor is probably mounted to the firewall with a hose running to the intake manifold. Check the voltage across terminals 1 and 4 by backprobing the connector.

2.7L Engine

  1. Measure the voltage between terminal 4 (sensor ground) and terminal 1 (sensor output).
  2. Specification should be 4-5 volts, with the ignition switch ON.
  3. Specification should be 0.8-2.4 volts at idle.
  4. If not within specification, replace the sensor.
Please let me know if you have questions and thanks for using Fixya.

Posted on Jan 24, 2011

canwoodjc

Canwoodjc

  • 3301 Answers

SOURCE: Hello I have a Hyundai tiburon 2003 v6 GT. I don't

the rpm's can vary from car to car , it all depends on the gearing in the transmission and ratios, 4.0 does seem high for a V6 the easiest thing would to be have your transmission serviced , on this car you need to get the Idle Air Control checked, In all the forums Ive read on this car , that seems to be whats wrong when the RPM's seem to high, also if you have the automatic trans and an electronic manual shifting mode does it do the same thing when you have it in the manual mode? there has been lots of discussion also on the MAP sensor,, I would suggest you have the OBD codes read to see if its listing any trouble codes within the computer that can help with locating your answers, once you get those codes if you post the results here, people will help you and explain what they mean, If you reply to this feed by replying, I will look them up for you

Posted on Jul 20, 2011

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

2005 hyundai elantra gt normal idle rpm


in neutral your idle should be anywhere between 700-900, in gear it should be down around 500.

Jun 21, 2016 | 2005 Hyundai Elantra GT

1 Answer

I have a 2003 Hyundai Tiburon Gt.When im coming to a stop and Im in neutral my car idles high.I can rev it up it drops back down to a 1,000 rpm's or where it should idle at.


Hello
The engine and transmission in this cars drivetrain are fully electronically controlled by a computer called the PCM (Power Train Control Module). Whenever a problem like this occurs the computer stores a record of the problem in the form of a fault code in its memory, to read these fault codes you must have the systems memory scanned with a special tool. Once the fault code(s) are read you then must perform the appropriate diagnostic testing to find and resolve the problem(s)

Jul 04, 2012 | 2003 Hyundai Tiburon

1 Answer

Hello I have a Hyundai tiburon 2003 v6 GT. I don't


the rpm's can vary from car to car , it all depends on the gearing in the transmission and ratios, 4.0 does seem high for a V6 the easiest thing would to be have your transmission serviced , on this car you need to get the Idle Air Control checked, In all the forums Ive read on this car , that seems to be whats wrong when the RPM's seem to high, also if you have the automatic trans and an electronic manual shifting mode does it do the same thing when you have it in the manual mode? there has been lots of discussion also on the MAP sensor,, I would suggest you have the OBD codes read to see if its listing any trouble codes within the computer that can help with locating your answers, once you get those codes if you post the results here, people will help you and explain what they mean, If you reply to this feed by replying, I will look them up for you

Jul 20, 2011 | 2003 Hyundai Tiburon

1 Answer

My 2003 Tiburon GT V6 5spd has been intermittantly hestitating and missing while at a contant speed and even stalling out from time to time. Also, the engine revs high at 2000 rpm then back down to 1000...


have you changed your fuel filter in the last year or so, if not. do it. a plugged up fuel filter will cause a lot of issues also. it can cause stalls, hesitation and stumbling.

May 08, 2010 | 2003 Hyundai Tiburon

1 Answer

2003 Hyundai Tiburon GT randomly drops RPMs


drops anywhere from 500 to 2000 RPMs. ??? don't understand what you're trying to describe. First suspicion - throttle position sensor. Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.
If you don't want to do this, then I recommend you take/tow the vehicle into a Hyundai Service Center (dealership), pay the diagnostic fee. They will tell you EXACTLY what the problem is and what's needed to fix it (parts, labor, tax, time-frame, etc.).

Jun 22, 2009 | 2003 Hyundai Tiburon

1 Answer

Location of Purge Control Valve on 2003 Hyundai Tiburon GT


Go to http://www.hmaservice.com/ and register (vehicle by VIN). Afterward, you'll have access to technical information (manuals, wiring diagrams, service bulletins, etc) about your vehicle.

Jun 09, 2009 | 2003 Hyundai Tiburon

1 Answer

2003 Tiburon GT V6


i have the same problem with my 99 tibby in the winter time when it's cold but it stops when the car is warmed up ,i had it checked out a few times and noone knows anything about it so i just let it warm up.

Jul 30, 2008 | 2003 Hyundai Tiburon

Not finding what you are looking for?
2003 Hyundai Tiburon GT V6 Logo

Related Topics:

86 people viewed this question

Ask a Question

Usually answered in minutes!

Top Hyundai Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Hyundai Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...