Question about 1994 Jeep Wrangler
your jeep should have all the holes and thread nuts already installed. pull up the carpet and locate them. the two close to the center are for seat belts as are the two outside of them. the four holes that form a large square/rectangular area are for the seat. if your seat is fold and tumble type, holes on the left wheel well are for the locking mechanism. i just pulled mine out and filled the thread holes with new bolts to keep out the water and dirt. yours may have screws or plugs in them. this install is for factory type only. mike
Posted on Nov 18, 2008
here is a link with all the vacum diagrams for your jeep. hope it helps.
Posted on Feb 12, 2009
Tips for a great answer:
Feb 01, 2013 | 1999 Jeep Wrangler
Oct 23, 2011 | 1988 Jeep Wrangler
Feb 01, 2010 | 1994 Jeep Wrangler
Oct 06, 2009 | 1997 Jeep Wrangler
Jun 27, 2009 | 1997 Jeep Wrangler
Mar 01, 2009 | 1984 Jeep CJ7
Nov 22, 2008 | 1998 Jeep Wrangler
148 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: