The number on the fan control in My 2005 pontiac grand prix and degree are in celsius. How do I change that.

David Gibbons

• 26 Answers

SOURCE: 2002 Pontiac Grand Prix Thermostat

as you face the engine the thermostat bell is on the right (drivers side) Follow the radiatoe hose. Remove the two bolts and raise the bell still attatched to the hose. the thermostat is there with the rubber seal. You can gently pry the thermostat out with a screwdriver or something similar. Put in new thermostat be sure it is the same as the old one, and then replace or change the seal (be sure it is the smae size and thickness as the old one as I got the wrong size from Napa) Then replace the bell, and tighten, but not over tighten. I hope this helps!

Posted on Jan 31, 2009

Dave C

• 1050 Answers

SOURCE: 3.1 exhaust and intake push rod placement grand prix

Found on the web:

Posted on Apr 02, 2009

Bruce Bracey

• 1000 Answers

SOURCE: Climate controls are now in Celsius. HELP

On your DIC (driver information center) to the left you will see 3 buttons arranged vertically.
The ENG/MET button is used to switch between english and metric. Push that button until all displays are in english, that should return your climate control to fahrenheit.

Once you have completed that, push and hold the "reset" button down for 2 seconds ( button just below the ENG/MET button). That should reset you DIC to the default brightness as well as your other displays.

Give it a try and let me know.
Regards,

Posted on May 02, 2009

SOURCE: changing serpentine belt 3.8 2007 pontiac grand

• Make sure your new belt exactly matches the old belt demensions
• Take a breaker bar or big rachet & release the tension on the automatic tensioner; very slowly
• Loop the old belt around the pulleys & fan
• Install new

Posted on Oct 17, 2009

Mike Butler

• 6674 Answers

SOURCE: spark plug gap for 2005 pontiac grand prix gt 3.8

.060 thousandths of an inch.

Posted on Nov 19, 2009