2008 Mitsubishi Eclipse GT Logo

Related Topics:

J
Jeanette Ramos Posted on Oct 14, 2016
Answered by a Fixya Expert

Trustworthy Expert Solutions

At Fixya.com, our trusted experts are meticulously vetted and possess extensive experience in their respective fields. Backed by a community of knowledgeable professionals, our platform ensures that the solutions provided are thoroughly researched and validated.

View Our Top Experts

How to Change an EGR Valve on a 2008 Mitsubishi Eclipse GT?

1 Answer

jamessizer

Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

  • Mitsubishi Master 7,515 Answers
  • Posted on Oct 15, 2016
jamessizer
Mitsubishi Master
Level 3:

An expert who has achieved level 3 by getting 1000 points

Superstar:

An expert that got 20 achievements.

All-Star:

An expert that got 10 achievements.

MVP:

An expert that got 5 achievements.

Joined: Jan 12, 2016
Answers
7515
Questions
0
Helped
690323
Points
37181

I, feel sorry for you, after reading your problem, but don't worry you visit the Reliable-Store they will help you for sure.
Best Manuals

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

0helpful
1answer

POSSIBLE FIXES TO CORRECT 401 CODE ON 2001 ECLIPSE

Is the solenoid opening to provide vacuum to the egr valve? Does the egr valve open when vacuum is applied? There are some tests posted at the link below.
Repair Guides Components Systems Exhaust Gas Recirculation egr System...
0helpful
1answer
0helpful
1answer

Need help locating the EGR valve on a 2001

It's a valve that is on a pipe from the exhaust to the inlet side, egr means exhaust gas recirculation and it to aid in cold starts and also emissions, it's usually at the rear of the engine to one side, hope this helps, it will possibly have a switch or plug coming from it
0helpful
1answer

Where is egr solenoid on 2003 eclipse spyder GT V6? I have PO403 code on and most say that is issue.

there should be a diagram on the inside of the hood , if not follow this link , read through the thread and you'll get to the picture
diamante install problems Club3G Forum Mitsubishi Eclipse 3G Forums
0helpful
2answers

2002 Mitsubishi Eclipse Service Engine Soon Light On

codes p0402--p0403deal with exhaust gas recirculation control circuit malfunction as well as the performance of this circuit check connections
0helpful
1answer

I cant find where the egr solenoid plugs in 95 mitsubishi eclipse gst trubo

egr transducer solenoid,,located at underhood, beside a/c idle up solenoid control, take alook at the vaccum hose at egr valve, its goes through the egr solenoid treansducer valve, picture later
0helpful
1answer

1995 mitsubishi eclipse gsx. Getting only 190 miles on a full tank of gas, driving slowly. Check engine light comes on. Only mods: aftermarket air fliter and blow of valve. Please help!

Check the code at advance auto parts, replace the PCV valve just in case. It is an inexpensive part, and if it is clogged will cause the engine to consume more fuel than normal. Also, check the EGR tube coming out of the EGR valve and going to the Intake Manifold. This clogs up with carbon, and is a very common problem that throws a code.

I’m happy to help further over the phone at https://www.6ya.com/expert/jeremy_69f3cc28d95bf514

4helpful
1answer

MItsubishi Eclipse p1494 code

P1494 code can cause by EGR lift sensor.

When the engine is cold,disconnect the EGR sensor connector and clean the contacts.

Reconnect the EGR connector and reset code.

================

If the code does come back then I will clean the carbon under the EGR valve (or replace it)/
the EGR air passage MUST be clean also.

Please order a EGR base gasket before you start this job.

It's very time consuming but it preventive you must do.

This should free up the movement on the EGR.


I will ran a FULL TANK of Chevron gas to clean out the injector also.


Reset the code and you should be fine.


Please post more information on the comment window.
0helpful
1answer

How to change headlight assemblies on 2008 Eclipse?

Probably not. They would not make it that difficult.
Not finding what you are looking for?

169 views

Ask a Question

Usually answered in minutes!

Top Mitsubishi Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

Ronny Bennett Sr.
Ronny Bennett Sr.

Level 3 Expert

6988 Answers

Thomas Perkins
Thomas Perkins

Level 3 Expert

15088 Answers

Are you a Mitsubishi Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...