SOURCE: head bolt torque specs and timing marcs for a 94 volvo 960 6cyl
you do 14 foot pounds then 45 foot pounds then a 120 degree turn.if aluminum heads are what you have
SOURCE: had a valve job done
Hello
I Hope this Help this is the the timinig belt set up for the 1.9 turbo petrol
Regards Paul
www.limotec.co.uk
SOURCE: 2001 Volvo s60 D5 very difficult to shift gear
if you have a hydraulically assisted clutch, check the reservoir. it's located on the firewall in the vicinity of the brake vacuum booster. if it's low/empty, fill it. you may have air in the system which will require bleeding. what is the mileage? you may be due for a clutch. if you google, "hard shifting manual trans" you will gain more insight on the matter.
SOURCE: im getting 2 errors on
I would highly suspect one of the wheel sensors has a problem. There is a sensor located in the outer axle bearing housing on each corner of the car.If the sensor and/or the wiring is damaged, the abs won't work and it also affects the proper function of the srs system.
To much too type, there is a lot of details to this job, the best thing to do is to get a book on this particular vehicle, its about $20.00 at a auto parts store. This will give you all the directions, the do's and don't-- locations and torque specs. ect....
176 views
Usually answered in minutes!
×