I posted a question earlier,but hereis a photo of the connections.I want to wire the radio into a Mazda MX5 but I don`t know which wires or connector pins to use
SOURCE: Mazda mpv O2 sensor wires?
Put some penetrating oil on them and let it soak overnight. This will break up the rust and other build up. Make sure that it is penetrating oil, you can get it at any automotive store.
SOURCE: wiring digram for 08 mazda 6 radio install
not sure how much the radio or harness changed from 2006 until now, but here is a link to some Mazda radio schematics:
http://www.the12volt.com/installbay/vehiclewiring/1/yeard/Mazda.html
SOURCE: 1989 Mazda MX5 - Right tail lights not working
i have mazda mx5 1989 ol the ligte not warkin olvisy the head lighe warking the ingine fine stoping not signal not any ad
SOURCE: Radio wire diagram for 2011 Mazda 3
2011 Mazda 3 Car Stereo Wire Harness Color Codes
Car Radio Battery Constant 12v+ Wire: Brown
Car Radio Accessory Switched 12v+ Wire: Light Blue
Car Radio Ground Wire: Black
Car Radio Illumination Wire: Light Green
Car Stereo Antenna Trigger Wire: Black
Car Stereo Amp Trigger Wire: Light Blue
Car Stereo Amplifier Location: Under the Passenger Seat
Left Front Speaker Positive Wire (+): White/Yellow
Left Front Speaker Negative Wire (-): Blue/Green
Right Front Speaker Positive Wire (+): Red/Blue
Right Front Speaker Negative Wire (-): Red/White
Left Rear Speaker Positive Wire (+): White/Light Green
Left Rear Speaker Negative Wire (-): Pink/Brown
Right Rear Speaker Positive Wire (+): Light Blue/Brown
Right Rear Speaker Negative Wire (-): Light Green/Light Blue
SOURCE: Mazda MX5 tiorque settings
I realize that I need to advance the timing to increase fuel intake to match the extra air, now that my cold air intake system is installed. How might I address this without taking my miata to a mechanic?
45 views
Usually answered in minutes!
×