Question about 1997 Oldsmobile Cutlass Supreme
It's not to hard to do, just have to lay upside down in your pas. floorboard, remove plastic panels under gloove box with small nut drivers,(can't remember size) then there are three hex head screws holding on the blowerplus the wireing connector, anf it has a wierd rubber gasket, hope this helps.
Posted on Sep 12, 2008
That could be only two things one a bad pistion or a bad rod. I would take the engine apart and find one or both maybe broken or in bad repair fixing. I would not drive it far it will throw the pistion or rod right through the engine costing ya more money or a new car.
Posted on Jan 09, 2009
Sounds like a RFID issue. Your key most likely has a chip inside of it. Most of the time people will have multiple keys on their key chain that can cause interference with the receiver in your steering column. Try using the one ignition key to start.
Posted on Jan 10, 2009
Normally the firing order will be stamped on the top of the intake manifold also the number one plug will be the front one on the drivers side of the car. On the top of the distributor cap you should see a number one that is where the number one plug wire goes follow the firing order on the manifold and go clock wise on the distributor cap
Posted on Mar 18, 2009
the fuse box will be in 1 of 3 places (1)glovebox (2)under dash by drivers foot kick panel or (3) under hood .
Posted on Nov 22, 2009
Tips for a great answer:
Jun 30, 2014 | 1997 Oldsmobile Cutlass Supreme
Jan 31, 2013 | 1997 Oldsmobile Cutlass Supreme
Mar 10, 2012 | Cars & Trucks
Aug 26, 2011 | 1997 Oldsmobile Cutlass Supreme
Feb 20, 2011 | 1997 Oldsmobile Cutlass Supreme
Jul 07, 2010 | 1997 Oldsmobile Cutlass Supreme
Nov 06, 2009 | 1997 Oldsmobile Cutlass Supreme
Oct 04, 2009 | 1995 Oldsmobile Cutlass Supreme
Sep 27, 2009 | 1994 Oldsmobile Cutlass Supreme
May 07, 2009 | 1997 Oldsmobile Cutlass Supreme
182 people viewed this question
Usually answered in minutes!