Question about 1986 Oldsmobile Cutlass Supreme
It physically will fit and bolt up,but there are many different ratio,and drive and driven sprocket tooth counts,different final drive ratios,all monitored by the computer with electronic speed sensors.If the trans from the 95 has a different ratio than the 93,the computer will set gear ratio error codes,and possibly put the trans in a failsafe mode,stuck in 2nd or 3rd gear.On the transmission case,down by where the passenger side axle would go in,is a thin metallic tag,maybe 2"x 3",and it has bar codes,and also a series of numbers and letters.The numbers and letters,large cap,are the final drive gear ratio code.They should match on the two transmissions in question.
Posted on Jul 31, 2008
That should be it for fuse compartments..
If its not the fuse(s) or relay it might bethe switch,, or the motor..
Try to determine if there is power getting to the switch,, if so see if there is power to the motor..
You can find replacement parts pretty cheep on-line..
Hope this helps !!
Please rate me good ;o)
Posted on Jul 10, 2009
the fuse box will be in 1 of 3 places (1)glovebox (2)under dash by drivers foot kick panel or (3) under hood .
Posted on Nov 22, 2009
There's a slight anti freeze smell when you turn the heater on. All fuild r full just wander if the heater core leaking. nothing wet inside the car just a smell
Posted on Jan 03, 2010
Ok sent you this the engine you have to specify that engine has to help you. Thanks
Posted on Mar 24, 2010
Testimonial: "good job getting info. and real quick too"
Tips for a great answer:
Jan 07, 2016 | Cars & Trucks
Mar 12, 2012 | 1983 Oldsmobile Cutlass Supreme
Feb 26, 2012 | 1995 Oldsmobile Cutlass Supreme
Nov 21, 2010 | 1986 Oldsmobile Cutlass Supreme
Aug 06, 2010 | 1986 Oldsmobile Cutlass Supreme
May 04, 2010 | 1986 Oldsmobile Cutlass Supreme
Apr 28, 2010 | 1994 Oldsmobile Cutlass Supreme
Feb 03, 2010 | 1994 Oldsmobile Cutlass Supreme
Nov 29, 2009 | 1986 Oldsmobile Cutlass Supreme
99 people viewed this question
Usually answered in minutes!
Step 2: Please assign your manual to a product: