SOURCE: VW Polo Classic 1997 IDLE Problems
Hello, VW polos 1.0, 1.4. 1.6, suffer from carbon bulid up in the throttle bodys causing bad idling, esp the Bosch Mono-Motronic (Throttle Body Injection systems), a good clean with carb cleaner should repair the problem, also engine temp sensor replacement and idle speed control valve replacement can help idle problems.
SOURCE: What is the firing order of VW POLO 1.6 classic
!,3,4.2..Standard for most 4 cylinder vehicles
SOURCE: VW Polo Classic, fuel efficiency problem
Has the car been serviced recently?
If not I would suggest getting it done.Not sure if you have diesel or petrol, but oil can thicken causing more load on the motor and airfilters get blocked and can cause a rich fuel mixture.
If petrol you can take out the plugs to check if they are a light brown colour, if very dark or black you need to check and adjust carb/injection settings/filter.Need to know what engine it is really.
SOURCE: I need to replace the rear brake pads on my Polo 1.9 TDi
this is a turn in caliper, meaning that as you try to compress the piston, you also need to rotate it clockwise. you can buy tool for this at nearly any parts store, and is fairly inexpensive.
Testimonial: "Thank you for your assistance. I found out the turning piston part by mistake, a day after I posted the question, when I tried to use a G-Clamp."
SOURCE: Overheating Polo
this sounds like a thermostat fault, but also could be the sensor switch to the radiator but is more likely the thermostat, it should be located at the front top of engine, follow the top water hose to the engine and you will find the thermostat housing, also just a heads up, these had a problem when first made, according to the known fixes and problems with VW's the hoses corroded inside and started loosing water, this could be wise to get the system presure checked to...hope this helps
2,927 views
Usually answered in minutes!
×