Roll down the drivers window. Lock it and set the alarm. Reach in and open the door from the inside. The alarm should go off.
Well Dan,
That would be a waste of everyone's time seeing as I have a gps tracking system and a remote engine shut off on my van....
you dont even know if you have an active alarm in vehicle and you dont know thieves very well they can hack your vehicle in less than 3 seconds and you wont stop them
×
Pay someone to steal your van.
SOURCE: jeep grand cherokee 2000 3.1 td alarm indicator light situated on dashboard
If this is an after market alarm it could have been turned off.
SOURCE: how to activate alarm 2001 bmw 325ix
The flashing light does not mean you have an alarm. They were not standard in the 3-series.
You can get one installed or if you want the dealer can program the lights to flash when locking and unlocking doors even with out alarm. This is called "acknowledgement without DWA"
SOURCE: chrysler town and country wiring diagram
Where is the amplifier located on a 2002 Town & Country? My stereo seems to be working, but there is no sound coming out of the speakers.
SOURCE: How do you read the flashing check engine light
Turn key on and off twice without starting engine. count flashes, their will be slight hesitation, make one digit after hesitation make second digit.(flashes 5 times hesitates flashes three times hesitates your code is 53) if it countiues to flash, its making second two digit code.
SOURCE: Alarm button broken. Cannot
You can arm or disarm alarm manually with the key at the drivers side door, turn the key to open the locks and the alarm must be disarmed.
128 views
Usually answered in minutes!
Thank you Randy... It works
×