I have a 2004 Chrysler Pacifica. Showing codes PO508, PO113, and PO700. How do i fix these issues???

ALBERT GARCIA

• 975 Answers
• Posted on May 05, 2009

SOURCE: can you tell me what these codes are and how much

codes descriptions are:
PO003: Fuel Volume Regulator Control Circuit Low
MAP PO0108 : would indicate a fault in the MAP sensor circuit.
PO113: Intake Air Temperature Sensor 1 Circuit High Input
PO481: Fan 2 Control Circuit
PO508: Idle Air Control System Circuit Low
PO700: Automatic Transmission Control System Malfunction
P2302: Ignition Coil “A” Secondary Circuit
Please consult with a service technician you trust to verify costs of repair. hope this helps AJ

SOURCE: how to fix Chrysler 300M: 99 30m Chrysler have the codes po700,po734,po733,po122,po113,po108

I would like to ask you that did you change the Transmission .

SOURCE: hoe to fix Chrysler 300M: 99 30m Chrysler have the codes po700,po734,po733,po122,po113,po108

codes PO700, PO733, PO734 are all transmission codes all have to do with inproper outputshaft speed could be a bad outut shaft sensor but most likely the transmission is slipping, and that is not good if the transmission is shipping you will need to replace it, but try chaning the fluid and filter and and see if that does not take care of the problem.

code PO122 is the TPS sensor, code PO108 is the MAP sensor the MAP sensor can set the TPS code but the TPS can not set the MAP code so i would start with the MAP sensor ..... code PO113 is the intake air temp. sensor check the wiring on the top of the engine to make suer there is not a bad spot in the harness if all looks good then replace the sensor, but the way all 3 sensors use a commoin ground circuit so check the wiring before you replace any of the sensors......good luck

chargerhp

• 815 Answers
• Posted on Dec 18, 2011

SOURCE: Chrysler 300M: 99 30m Chrysler have the codes po700,po734,po733,po122,po113,po108

108 Map sensor or pcm computer,113 IAT sensor or pcm,122 TP sensor or pcm, 700 Automatic trans computer or pcm, 733 Automatic trans leak or low pressure, 733 leak low pressure Your main computer(pcm) is shot start there. Then possible trans computer shot also(TCM)