How do I change the headlight globe on 07 Ford Territory?

Question edited for a lot of clarity and into normal written English.
Question moved to model category.

Test your Low Beam Relays

https://www.startmycar.com/ca/ford/territory/info/fusebox/2014

..

i WOULD get the manual from a LIBRARY AND FOLLOW IT.


ALSO SEE THIS:

https://www.bing.com/images/search?q=2006+ford+territory+wiper+switch&qpvt=2006+Ford+territory+wiper+switch&FORM=IGRE

AND
https://www.bing.com/videos/search?q=2006+ford+territory+wiper+switch&&view=detail&mid=25F5CA18173E1C7D4E2325F5CA18173E1C7D4E23&&FORM=VRDGAR&ru=%2Fvideos%2Fsearch%3Fq%3D2006%2Bford%2Bterritory%2Bwiper%2Bswitch%26FORM%3DHDRSC3

https://www.bing.com/videos/search?q=2006%20ford%20territory%20wiper%20switch%20REPLACE&qs=n&form=QBVR&sp=-1&pq=2006%20ford%20territory%20wiper%20switch%20replace&sc=0-40&sk=&cvid=31708DB3D0A44165B44F2337681C33B4

Best Manuals While you fix it might need professional supervision.. If you want to DIY use this link attached here

Check the harness under the truck, it may be damaged or has a pulled loose connector, follow it back along the chassis checking for power along the way with the pedal depressed. A 12 volt test light works well for this work.

hi, please go here....http://www.fordfuse.com/

spend some time reading the page and checking out the 'source sites they list and you should be smiling............happy trails

There is a large rubber boot that covers the headlight globe . Pull it back, pinch the retainer spring and lift out the H4 globe.

Replace the actuator in that door. Its bad.

To get at the fog lights out you have to unclip them, 4 latches - one on each cnr of the black ousing which can be reached by reaching down past headlights.
Once loose they can be accessed by removing the wheel arch lining and pull out that way after unclipping the wiring block connnector. They look like a sealed unit but are not and come apart between the ehite and black housing. This makes it possible to be able to replace the 55w halogen bulb

brian_au no 1 solution is wrong.. globe is under a spring clip cover . remove cover, then unplug, then release retaining spring behind the globe. replacement is just process reversal