Question about 1996 Toyota Camry

Open Question

1996 toyota camry

Cant get info. from obd. scaner

Posted by bruce anderson on

Ad

5 Related Answers

motor1258

Mike Butler

  • 6674 Answers

SOURCE: OBD code 0401 (1997 Toyota Camry 4 cyl)

There is a VSV (vacuum switching valve) , usually mounted on the back side of engine block, under the intake manifold, as well as the map sensor, that can also cause that code if one or the other is faulty. It takes some pretty detailed troubleshooting to confirm this in some cases, so if that's not in your line of work, you may have to have it properly diagnosed, or take a 50/50 shot at which one first.

Posted on Jan 24, 2009

Ad

Anonymous

  • 2 Answers

SOURCE: To remove the interior door panel of a 1996 Toyota camry so that

My 96 Camry LE has 9 attachments that are visible. Some have plastic caps covering the screws; others do not. There are screws at the door handle, at the forward portion(with covers) when the door is open and the back edge (small covers). As I recall, there are several friction type fasteners around the perimiter of the panel that can be removed by prying carefully away from the metal portion of the door to free up the trim panel. Once these are loose, the trim around the inside door release handle (the one you pull to open the door) can be pryed in a backward motion. Then the entire panel can be removed by pulling upward and backward at the same time (it easier to do this with the window down). Then it is a matter of disconnecting the wires attached to the various controls for the electric windows and door locks to free up the panel itself. There is probably a plastic skin covering the metal portion of the door. Carefully pull that away to expose the inner workings of the door latch mechanisim. The rest of the procedure should become easy to figure out. I have not removed the exterior door handle itself; but it is a simple mechanism as I recall. Best of luck to you.
Timmy P.

Posted on Mar 04, 2009

Ad
Murphybanton

Onifade Adewunmi

  • 2004 Answers

SOURCE: 1996 Toyota Camry question. If the brakes start

Not at all.

Posted on Sep 28, 2009

Testimonial: "Thanks!"

Toyota Ed

  • 1861 Answers

SOURCE: how to erase toyota camry code obd 1

Hello, and welcome to FIxYa.

To erase the check engine light on a 1994 Camry, open the hood, and, in the engine compartment fuse box, remove the blue 15 amp EFI fuse for one minute. This will clear the codes. If you have a hard code; ie a malfunctioning sensor, the light will come right back on.

Thanks for choosing FixYa for assistance.

Posted on Mar 12, 2010

Anonymous

  • 36 Answers

SOURCE: firing order for toyota camry v6 1996

the firing order is in fact 1 2 3 4 5 6 the number one cylynder is on the left at the back, as you look at the engine from the front >>
positions of cylinders
-------------
1 3 5

2 4 6
------------

Posted on Mar 15, 2010

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1 Answer

I have innovia obd scaner 3100,but it can't diagnos actros. it say there is no dtc in the computer. what can i do?


Daniel, According to the instructional video below, the code reader is not listed to work on your vehicle, only OBD2 compliant vehicles Domestic, Asian, European sold in United States. Before purchasing another code reader or scan tool make sure it will work and diagnose codes for your vehicle, contact the manufacturer if need be for info. Check the attached links,instruction and guides, Good luck
"I hope this helped you out, if so let me know by pressing the helpful button. Check out some of my other posts if you need more tips and info."
Innova 3100 Instructional Video
http://www.ebay.com/bhp/mercedes-scanner
https://answers.yahoo.com/question/index?qid=20131225111930AAcMz1v
Mercedes Benz DTC Fault Code List

Jul 08, 2016 | Cars & Trucks

1 Answer

Where do i find the 31 vaf sensor curcuit on a 4s camry engine


Toyota Camry Cressida OBD Trouble Codes -

www.troublecodes.net/toyota/toyota-camry-cressida/
Get Help at BAT Auto ยท Get an ALLDATAdiy Repair Info Subscription ... Toyota Camryand Cressida have two separate diagnostic connectors and two separate diagnostic modes which both provide ... 92-95 Camry 2.2L Engine Code: 5S-FE ... 31, Volume air flow (VAF) sensor-Cressida -circuit, Wiring, VAF sensor, ECM.

Nov 13, 2015 | 1998 Toyota MARK II

2 Answers

1998 toyota camry air bag light is on dash port


Have a shop hook it up to their diagnostic computer to tell you whats going on.

Jan 23, 2015 | Toyota Camry Cars & Trucks

1 Answer

Trying install middle main bearing on a 96 Toyota


I have not done this particular task, but there may be some useful info in here

http://www.turboninjas.com/camry/eg1.pdf

Sep 27, 2014 | 1996 Toyota Camry

1 Answer

My 99 ford windstar check engine light is flashing and there is a loud tapping noise coming from the motor what do i do


flashing light could be codes from obd ,did you get any codes with scaner?
tapping noise could be a few things from oil pump , little oil in moter,bent push rod,dry lifter ,need more info of codes/ let me know ,and i'll try to help more.

Oct 01, 2012 | 1999 Ford Windstar

1 Answer

Can anyone tell me what Diagnostic OBD Code P2238 meens for a 2004 Toyota Camry?


Most of the codes for those readers are not in the book/manual. Only the common ones are. You can search online at the readers website or just enter the code number and usually you cna find the issue easily. I don't even know where my book is anymore. I just plug it in and then hop online. its so much faster.
You can buy a new one:

May 22, 2012 | Cars & Trucks

1 Answer

My 1996 Toyota Camry chugs after shifting gears.. Any ideas Why?


Hi Tony,

Your vehicle should have an OBD diagnostic computer which monitors your transmission behaviour.

Have your fault codes read either at Autozone, or your local Toyota dealership - this should only take around 15 minutes to perform. This will immediately identify which transmission circuit is causing this condition.

Nov 02, 2011 | 1996 Toyota Camry

1 Answer

97 toyota camry owners manuals


Do you mean a workshop manual? Here is, in several parts, info for a 1992-96 car. Yours will be similar in many ways

http://www.turboninjas.com/camry/

Oct 26, 2011 | 1996 Toyota Camry

1 Answer

1995 chevy blazer 4.3 ecm will not give codes. my scaner will not communicate with ecm


Are you sure that it is an OBD 11 system not all of the 95s were It might have the 19 pin port connector but its not connected to anything and its an OBD 1 system a 4.3 they should be talking about a VCM not an ECM. Im not saying this is the olny possible answer you should check this out first . 96 was the first year year for OBD 11 AND SOME 95 DO HAVE IT

Apr 26, 2011 | 1995 Chevrolet Blazer

Not finding what you are looking for?
1996 Toyota Camry Logo

Related Topics:

288 people viewed this question

Ask a Question

Usually answered in minutes!

Top Toyota Experts

Marvin
Marvin

Level 3 Expert

85239 Answers

Colin Stickland
Colin Stickland

Level 3 Expert

22485 Answers

Jeffrey Turcotte
Jeffrey Turcotte

Level 3 Expert

8984 Answers

Are you a Toyota Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...