How to change mahindra xylo alternator belt - Mahindra Cars & Trucks

If it's low, it will make a humming noise whe you turn the steering whell. If it's belt driven and belt is loose, it will make a squeeling noise

for heavy machinery cars etc. luckily there are many websites
that can help you repair
for eg site like reliable-store is very active in this.. instant help, emails and all that's fantastic

look at the timing cover
plastic = belt
alloy = chain

Battery temp sensor voltage to high

The marks should not be on the belt, Marietje - the marks should be on the PULLEYS.

problem in ecu flash

check the condition and tension of the drive belt. Check that the battery terminals and posts are shiny clean and tight. Have the battery load tested for faulty cells. Have the alternator tested for output

It is possible you have a bad bearing in the alternator. They make an automotive stethoscope to listen for this, but sometimes you can get by using a screwdriver and pressing your ear against the handle while touching the tip to the body of the alternator. Be careful not to get the screwdriver into the alternator fan. You can generally hear a bad bearing. Perhaps a better check is to take the belt off the alternator and spin it by hand (when cold). If it turns rough, makes noise, or wobbles, the bearing is bad.

in mahindra bolero showing fault code in scanner p183f.
what does it mean

looking to your matter Hisar comes under Haryana..............
Your Xylo is Licking engine oil...........
please place a clean cloth on the silencer and accelerate ur car for few seconds and then check for the oil diposit on the cloth.....if there is oil seen on the cloth or white foggy smoke coming out of the silencer then ur engine is defective which could be reported to the MAhindra company