2003 Mercedes-Benz C-Class Logo

Related Topics:

My car will not change gears or go to park until i turn car off

Car will not go from drive to park. car will not change gears when driving it.

3 Related Answers

Anonymous

  • 105 Answers
  • Posted on Nov 21, 2009

SOURCE: car driving ok then sticking in gear switched car

check the gear oil cage of your car and confirm if its still there, you will find it under the engine of your car


rate this

Ad

Jason Johnson

  • 1619 Answers
  • Posted on Apr 25, 2010

SOURCE: my car is jerking while driving.

Have engine wiring harness checked as 1993-1995 MB's were forced by US to use biodegradanle insulation on its wires. If thats not it replace coils and do a tunes up.

emissionwiz

Marvin

  • 85242 Answers
  • Posted on Aug 20, 2016

SOURCE: my car go from drive to park unless i turn it off. It also will not change gears when i try to drive it. Mercedes 2003 c240

You need to see a transmission shop but I suspect the transmission has a internal part failure

Add Your Answer

×

Uploading: 0%

my-video-file.mp4

Complete. Click "Add" to insert your video. Add

×

Loading...
Loading...

Related Questions:

1helpful
1answer

2007 Honda oddesay key stuck in ignition and gear shifter moves freely from park to drive

key wont come out or turn to off until gear selector is in park [ recognize that its in park ] your selector or transmission selector cable is damaged
0helpful
1answer

My car go from drive to park unless i turn it off. It also will not change gears when i try to drive it. Mercedes 2003 c240

You need to see a transmission shop but I suspect the transmission has a internal part failure
0helpful
2answers

2000 Buick Century 69k mi. automatic trans. hard thud changing from 1st to 2nd gear, whining noise between gears

No idea without a drive so please ask a local mechanic to have a look for you
0helpful
1answer

Car won't turn

try to change you car battery and then shift to park and try to start the engine if that didint help contact me on [email protected] i will help you to get it back agian
0helpful
1answer

Lound clunk going from park to drive in vt holden commodore

Mine was the centrebearing which in turn failed broke the rubber coupling at the gearbox side and snapped the tailshaft so be careful driving
0helpful
1answer

Car just started today. When driving to it sounds like thump when changing gears. Talked to transmission guy and he said that Mazda is notorious for faulty park/neutral switch. If we replace that it should...

The park/neutral safety switch has two purposes,
1 not to let the engine start unless it is in park or neutral settings.
2 is when you manually switch gears, it tells the computer and the computer keeps the engine in check until you shift, then the computer compensates for that gear and so on.
I would check motor/ transmission mounts, drive shafts, Suspension bushings,struts, or steering linkage first.
0helpful
1answer

Hello. my 2009 CRV had been seeming to make some odd noises when changing gears from park, reverse, and drive. The dealership said nothing was wrong. I had been keeping a close eye on it for a few...

changing gear wont hurt your car unless its thumping into gear, you should all ways put your foot brake on anyhow when changing into reverse or drive to stop this thumping but going into drive then reverse realy wont hurt it in any way
1helpful
1answer

1997 t100 6cyl. 4wd. went through phase of actually having to put into drive to start. then had to turn ignition and move shifter through all gears until it started. now nothing. indicator lights seem to...

the shifter linkage has become loose or shifted and not aligning properly, truck will only start in park or neutral.
the linkage needs to be realigned and repaired. this should be done at a professional level. the alignment is critical, if it is near shift point it can pop from park to reverse, or change gear suddenly causing an accident or transmission damage.
0helpful
1answer

Once in Drive, Jeep does not easily shift back to Park

Try to check the trans mission gears of your 1995 jeep grand cherokee.The shift fork and the clutch sleeve of the trans mission is locking to the other gears .And then also check the starter motor and its solenoid.if the starter motor solenoid is destroyed or worn out replace .
0helpful
1answer

SHIFTING PROBLEM '03 E320 WAGON

mercedes e320 wagon gear shifting problemgear start from 2,3,4,5, not from one
plz help me i change 2 gear so many computer still facing same problem
Not finding what you are looking for?

99 views

Ask a Question

Usually answered in minutes!

Top Mercedes-Benz Experts

ZJ Limited
ZJ Limited

Level 3 Expert

17989 Answers

xxxxxx xxx

Level 3 Expert

5117 Answers

Arnie Burke
Arnie Burke

Level 3 Expert

7339 Answers

Are you a Mercedes-Benz Expert? Answer questions, earn points and help others

Answer questions

Manuals & User Guides

Loading...